owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 51 d2ureepe, Version: 2.11.8.1 Occupant safety 51 XWith a smooth motion, pull the seat belt outReleasing the seat belts of seat belt outlet :. XPress seat belt release button ? XPlace the shoulder portion of the seat belt (Y page 50). across the top of your shoulder and the lap Allow the retractor to completely rewind portion across your hips. the seat belt by guiding latch plate ; XPush latch plate ; into buckle = until it (Y page 50). clicks. ! Make sure the seat belt retracts Seat belt adjustment function: The seat completely. Otherwise the seat belt and/or belts on both front seats adjust to the latch plate could get caught or pinched in upper body automatically as necessary the door or in the seat mechanism. This can (Y page 51). damage the seat belt and impair its XIf necessary, adjust the seat belt to the effectiveness, and/or cause damage to the correct height (Y page 51). door and/or door trim panel. Such damage XIf necessary, tighten the lap portion to a is not covered by the Mercedes-BenzSafety and security snug fit by pulling shoulder portion up. Limited Warranty. All lap/shoulder belts except the driver’s seat Damaged seat belts must be replaced. belt have special seat belt retractors to Contact an authorized Mercedes-Benz secure child restraints properly. For more Center. information on special seat belt retractors, see “Infant and child restraint systems” Rear center seat belt (Y page 56). The seat belt of the rear center seat may be To release the seat belt with seat belt release button ?, see (Y page 51). blocked when the left rear seat backrest is folded forward and back (Y page 199). The seat belt can then not be pulled out. Seat belt adjustment function XUnblocking the seat belt of the rear The seat belt adjustment function adjusts the center seat: Pull the center seat belt seat belts on both front seats to the upper approximately 1 in (25 mm) out of the seat body of the respective vehicle occupant. The belt outlet in the seat backrest and release seat belt will be pulled slightly tighter for that it. purpose when The seat belt is retracted and unblocked. R you engage the latch plate into the buckle and then turn the SmartKey in the starter Seat belt outlet height adjustment switch to position 2 You can adjust the height of the seat belt R the SmartKey in the starter switch is in outlet for the driver’s and front passenger position 2 and you then engage the latch seat. plate in the buckle The seat belt adjustment function takes place with a certain amount of retracting force when the system senses slack between the vehicle occupant and the seat belt. Do not retain the seat belt during this procedure. You can activate or deactivate the seat belt adjustment function via the control system (Y page 145). Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders