owners manual Skoda Rapid

all ratings: 0 average rating: 5

Password/PIN code change 1nlocking and opening Read and observe and on page ęĜ first. 1nlocking and locking 0he factory set password for the 3i-Fi connection is the complete vehicle Introduction identification number (upper case); the factory set PIN code for the 3i-Fi Direct connection is the last ě digits of the vehicle identification number. 0his chapter contains information on the following subjects: After changing the password/PIN, the connection to SmartGate must be re-es- 3ith the key on the lock cylinder unlock / lock Ěĕ tablished on the communication device to be connected using the new pass- 1nlocking/locking with the remote control key Ěĕ word or new PIN code. 1nlocking / locking - KESS5 ĚĖ If the password/PIN code is still set to the preset factory password/PIN code, Locking and unlocking the vehicle with the central locking button ĚĖ you are requested to change the password/PIN code after starting the ŠKODA Safe securing system Ěė application. 3ithout changing the password/PIN code, you are unable to use Individual settings Ěė the application. Opening/closing a door ĚĘ Changing the password for the 3i-Fi connection Child safety lock ĚĘ ›Open the SmartGate web interface. Malfunctions ĚĘ ›In the “3PA / 3PAė key:” menu item, enter the new password (ĝ to ěĘ al- 5our car is equipped with a central locking system. phanumeric characters and special characters, upper and lower case). ›Confirm the password change by tapping on the “Save” button. 0he central locking system allows you to lock and unlock all doors, the fuel fill- Ė) ›Restart SmartGate by tapping on the “Reboot” button. er flap and boot lid at the same time. 0he functions of the central locking sys- tem can be individually adjusted » page Ěė. Changing the PIN code for the 3i-Fi Direct connection ›Open the SmartGate web interface. After unlocking, depending on vehicle equipment and setting the following is ›In the “3iFi Direct PIN:” menu item, enter the new PIN code (ě digits). valid for the central locking. Confirm the PIN code change by tapping on the “Save” button. ▶ › 0he turn signal lights flash twice as confirmation that the vehicle has been Ė) ›Restart SmartGate by tapping on the “Reboot” button. unlocked. ▶ 0he doors, the boot lid and the fuel filler flap are unlocked. Note ▶ 0he interior lamp illuminates. If you have forgotten your password/PIN code for connecting to SmartGate, ▶ 0he SafeLock system is switched off. SmartGate must be reset to the factory settings in a specialised workshop. ▶ 0he indicator light in the driver door stops flashing. ▶ 0he anti-theft alarm system is deactivated. After locking, depending on vehicle equipment and setting the following is valid for the central locking. ▶ 0he turn signal lights flash once as confirmation that the vehicle has been locked. ▶ 0he doors, the boot lid and the fuel filler flap are locked. ▶ 0he interior lamp goes out. ▶  0he SafeLock system is switched on. Ė) If the “Reboot” interface is not displayed, you must manually restore the web browser display. 1nlocking and opening ęĞ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders