owners manual Skoda Rapid

all ratings: 0 average rating: 5

Connecting to an iOS communication device ›Start the SmartGate application using the communication device to be con- ›Switch on the ignition. nected. ›Switch on the 3i-Fi on the communication device to be connected. ›0hen follow the instructions in the manual, which are included in the ›Allow the communication device to be connected to search for available 3i- SmartGate application. Fi networks (see the Owner's Manual for the communication device to be 3ith SmartGate, a maximum of two communication devices can be connected connected). simultaneously using 3i-Fi Direct, with as many launched ŠKODA applications Ė) ›In the menu of the detected networks select “SmartGate_.” or “DIREC0 as required. Ė) SmartGate_.” . If you want to connect to SmartGate in another vehicle, you must first end the ›Enter the password » page ęĞ. existing connection to the SmartGate application and then re-establish the 3ith SmartGate, a maximum of four communication devices can be connected connection. simultaneously using 3i-Fi. In these communication devices, up to four ŠKODA applications can be started simultaneously. Disconnection Disconnection is possible in one of the following ways. Disconnection ›Switch off the ignition for longer than Ě seconds (for vehicles with a starter Disconnection is possible in one of the following ways. button, switch off the engine and open the driver's door). ›Switch off the ignition for longer than Ě seconds (for vehicles with a starter ›End the connection in the SmartGate application. button, switch off the engine and open the driver's door). ›Switch off the 3i-Fi on the connected communication device. ›End the connection in the SmartGate application. ›Switch off the 3i-Fi on the connected communication device. Automatic connection If the communication device has previously already been connected with Automatic connection SmartGate, then the connection is automatically restored after the ignition is If the communication device has previously already been connected with started. SmartGate, then the connection is automatically restored under the following conditions. SmartGate web interface  0he ignition is switched on. Read and observe and on page ęĜ first.  0he 3i-Fi on the communication device to be connected is switched on.  0he communication device to be connected has stored the password re- SmartGate parameters can be set in the SmartGate web interface. quired for the connection check. 0he following address must be entered in the web browser of the connected communication device via 3i-Fi. Connection to SmartGate using 3i-Fi Direct H00P://ĖĞė.Ėěĝ.ĖėĘ.Ė Read and observe and on page ęĜ first. 0he setting changes are only effective after pressing the “Save” button and 0his type of connection is intended for communication devices running the then the “Reboot” button. Android operating system. Connection set-up ›Switch on the ignition. Ė) 0he last ě characters of the vehicle identification number of your vehicle are displayed at position ęĝ 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders