owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 owners manual EN

Document: pdf (20.48 MB) 723 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Controls in detail Useful features Programming integrated remote If you later wish to program a second iIndicator lamp 1 flashes immediately the control and/or third hand-held transmitter to first time the signal transmitter button is pro- Step 1: the remaining two signal transmitter grammed. If this button has already been pro- buttons, do not repeat this step and be-grammed, the indicator lamp will only start Switch on the ignition ( page 336).gin directly with step 3.flashing after 20 seconds. Step 2: Step 3: Step 5: If you have previously programmed a Hold the end of hand-held remote After indicator lamp 1 changes from a signal transmitter button and wish to control 5 of the device you wish to slow to a rapidly flashing light, release retain its programming, proceed to train approximately 2 to 5 in the hand-held remote control button step 3. (5 to12 cm) away from the signal trans-and the signal transmitter button. If you are programming the integrated mitter button (2, 3 or 4) to be pro-Step 6: remote control for the first time, press grammed, while keeping indicator Press and hold the just-trained signal and hold the two outer signal transmit-lamp 1 in view.transmitter button (2, 3 or 4) and ter buttons 2 and 4 and release Step 4: observe indicator lamp 1. them only when indicator lamp 1 be- Using both hands, simultaneously If indicator lamp 1 stays on gins to flash after approximately press hand-held remote control constantly, programming is complete 20seconds (do not hold the button for button 6 and the desired signal trans-and your device should activate when longer than 30 seconds). This proce-mitter button (2, 3 or 4). Do not the respective signal transmitter dure erases any previous settings for release the buttons until step 5 is com-button (2, 3 or 4) is pressed and all three channels and initializes the pleted. released. memory. Indicator lamp 1 will flash, first slowly and then rapidly. 492

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.