owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

ENGINE - Control System FUEL PUMP RELAY N71AK23AA position sensor does not detect engine rotation, The fuel pump relay supplies battery voltage to the the PCM de-energizes the relay after’approximately fuel pump. The PCM controls the fuel pump relay d one second. by switching the ground path for the solenoid side of the relay on and off. The PCM turns the ground Along with the MFI relay, the fuel pump relay at- path off when the ignition switch is in the Off position. When the ignition switch is in the On position, thetaches to a bracket on the drivers side of the dash PCM energizes the fuel pump. If the crankshaft panel. AIR CONDITIONING CLUTCH RELAY N7lAK24AA if it senses a part throttle/wide open throttle launch The PCM provides the ground path for the relay condition. This temporarily reduces the accessory coil. Relay operation is based on inputs the PCM load on the engine. receives from the air conditioning switch. The PCM deactivates the relay at vehicle start-up and also RADIATOR FAN RELAY AND AIR CONDlTIONING CONDENSER FAN RELAY (High, LOW) N71AK25AA The PCM supplies the ground circuit for the High/ The PCM operates the relay based on inputs from Low relay coil to operate the fan motor in high/low the engine coolant temperature sensor, vehicle speed sensor and A/C system. speeds. CHARGING SYSTEM INDICATOR LAMP N71AK26AA The PCM also supplies the ground circuit for the The PCM controls operation of the charging system lamp circuit for 3 seconds after the ignition switch indicator lamp located in the vehicle’s instrument is turned to the ON position and illuminates the cluster. The PCM provides a ground to complete indicator lamp. the lamp circuit if the charging output falls below a specified threshold. TACHOMETER N71AK27AAd crankshaft position sensor input. The PCM operates the tachometer on the instrument panel. The PCM calculates engine RPM from the GENERATOR N71AK2BAA The PCM controls the generator field current to voltages in accordance with the battery tempera- tures. regulate the generator output voltage to the target

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.