owners manual Hyundai Kona

all ratings: 0 average rating: 5

4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on OOS077066L the bulb align with the slots in the OOS077069L socket. Pull the bulb out of the Stop/Tail lamp Tail lamp (Type A) socket. 1.Turn off the engine. 1.Turn off the engine. Maintenance 7. Insert a new bulb by inserting it 2. Open the tailgate. 2. Open the tailgate. into the socket and rotating it until 3. Loosen the lamp assembly retainingit locks into place. 3. Remove the service cover using a screws with a cross-tip screwdriver. flat-blade screwdriver. 8. Install the socket into the assem- 4. Remove the socket from the bly by aligning the tabs on the socket with the slots in the assem-assembly by turning the socket 7 counterclockwise until the tabs on bly. Push the socket into the the socket align with the slots on assembly and turn the socket clockwise. the assembly. 9. Reinstall the lamp assembly to the5. Remove the bulb from the socket body of the vehicle. by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. OOS077068L 7-75

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders