owners manual Hyundai Kona

all ratings: 0 average rating: 5

5.Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 6.Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. 7.Push the socket into the assembly and turn the socket clockwise. Daytime running light OOS077034 OOS077038 If the LED lamp does not operate, we [1] : High beam, [2] : Low beam Turn signal lamp recommend you to have the vehicle checked by an authorized HYUNDAI Headlamp and position lamp 1. Open the hood. dealer. Maintenance 1. Open the hood. 2. Disconnect the negative battery cable. 2. Disconnect the negative battery cable. 3.Remove the socket (1) from the 3. Remove the bulb cover by turningassembly by turning the socket it counterclockwise. counterclockwise until the tabs on the socket align with the slots on 7 4. Disconnect the bulb socket-con- the assembly. nector. (for low beam and high beam) 4.Remove the bulb from the socket by pressing it in and rotating it 5. Remove the bulb from the head- lamp assembly. counterclockwise until the tabs on the bulb align with the slots in the 6. Install a new bulb. socket. Pull the bulb out of the 7. Connect the bulb socket-connec- socket. tor. (for low beam and high beam) 8. Install the bulb cover by turning it clockwise. 7-65

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders