owners manual Subaru Forester

all ratings: 0 average rating: 5

Maintenance and service/Replacement of wiper blades11-33 Washer Fluid Freezing CAUTION Replacement of wiper blades Concentration Temperature 30% . Adjust the washer fluid concen-Grease, wax, insects, or other material on 10.48F(−128C) tration appropriately for the out- the windshield or the wiper blade results in 50% −48F(−208C) side temperature. If the concen-jerky wiper operation and streaking on the 100% −498F(−458C) tration is inappropriate, sprayedglass. If you cannot remove the streaks washer fluid may freeze on theafter operating the windshield washer or if In order to prevent freezing of washerwindshield and obstruct yourthe wiper operation is jerky, clean the fluid, check the freezing temperatures inview, and the fluid may freeze inouter surface of the windshield (or rear the table above when adjusting the fluidthe reservoir tank.window) and the wiper blades using a concentration to the outside temperature State or local regulations onsponge or soft cloth with a neutral If you fill the reservoir tank with a fluid withvolatile organic compounds maydetergent or mild-abrasive cleaner. After a different concentration from the onerestrict the use of methanol, acleaning, rinse the windshield and wiper used previously, purge the old fluid fromcommonwindshield washer anti-blades with clean water. The windshield is the piping between the reservoir tank andfreeze additive. Washer fluids clean if beads do not form when you rinse washer nozzles by operating the washercontaining non-methanol anti-the windshield with water. for a certain period of time. Otherwise, iffreeze agents should be used the concentration of the fluid remaining inonly if they provide cold weatherCAUTION protection without damaging thepipingistoolowfortheoutside . Do not clean the wiper blades temperature, it may freeze and block theyourvehicle’spaint, wiper blades nozzles. or washer system. with gasoline or a solvent, such as paint thinner or benzine. This will cause deterioration of the wiper blades. . While removing the wiper blades from the wiper arms, do not return the wiper arms to the original positions. Otherwise, the windshield surface may be scratched. . When returning the raised wiper arms to the original positions, – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders