owners manual Nissan Murano

all ratings: 0 average rating: 5

Black plate (470,1) READINESS FOR INSPECTION/ EVENT DATA RECORDERS (EDR) MAINTENANCE(I/M) TEST GUID-D4D45566-401E-4F0A-995A-35B330AF403B GUID-5806F2C7-ABF6-48A5-B377-3E98320DFB18 Avehicle equipped with All-Wheel Drive (AWD) condition is “not ready”. If the MIL does not This vehicle is equipped with an Event Data should never be tested using a two wheel blink after 20 seconds, the I/M test condition is Recorder(EDR).ThemainpurposeofanEDRis dynamometer (such as the dynamometers used “ready”. to record, in certain crash or near crash-like by some states for emissions testing), or similar Contact a NISSAN dealer to set “ready condi- situations, such as an air bag deployment or equipment. Make sure you inform test facility tion” or to prepare the vehicle for testing. hitting a road obstacle, data that will assist in personnel that your vehicle is equipped with understanding how a vehicle’s systems per- AWD before it is placed on a dynamometer. formed. The EDR is designed to record data Using the wrong test equipment may result in related to vehicle dynamics and safety systems transmission damage or unexpected vehicle for a short period of time, typically 30 seconds movement which could result in serious vehicle or less. The EDR in this vehicle is designed to damage or personal injury. record such data as: Due to legal requirements in some states/areas . How various systems in your vehicle were or provinces, your vehicle may be required to be operating; in what is called the “ready condition” for an . Whether or not the driver and passenger Inspection/Maintenance (I/M) test of the emis- safety belts were buckled/fastened; sion control system. . How far (if at all) the driver was depressing The vehicle is set to the “ready condition” when the accelerator and/or brake pedal; and, it is driven through certain driving patterns. . How fast the vehicle was traveling. Usually, the “ready condition” can be obtained . Sounds are not recorded. by ordinary usage of the vehicle. These data can help provide a better under- If a powertrain system component is repaired or standing of the circumstances in which crashes the battery is disconnected, the vehicle may be and injuries occur. reset to a “not ready condition”. Before taking NOTE: EDR data are recorded by your vehicle the I/M test, check the vehicle’s inspection/ only if a nontrivial crash situation occurs; no data maintenance test readiness condition. Place the are recorded by the EDR under normal driving ignition switch in the ON position without conditions and no personal data (e.g. name, starting the engine. If the Malfunction Indicator gender, age and crash location) are recorded. Light (MIL) comes on steady for 20 seconds and However, other parties, such as law enforce- then blinks for 10 seconds, the I/M test ment, could combine the EDR data with the type 9-28 Technical and consumer information [ Edit: 2011/ 7/ 18Model: Z51-D ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders