owners manual Toyota Avensis

all ratings: 0 average rating: 5

AVENSIS_OM_OM20C20E_(EE).book Page 466 Thursday, January 29, 2015 1:47 PM 466 7-3. Do-it-yourself maintenance ■Situations in which the tire pressure warning system may not operate properly (if equipped) ●In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equipment) tire. • A tire has been replaced with a tire that is not of the specified size. • Tire chains etc. are equipped. • An auxiliary-supported run-flat tire is equipped. • If a window tint that affects the radio wave signals is installed. • If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings. • If the tire inflation pressure is extremely higher than the specified level. • If tires not equipped with the tire pressure warning valves and transmit- ters are used. • If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. • If the wheel set selected does not match the wheel set fitted to the vehi- cle, in case a second wheel set has been registered. ●Performance may be affected in the following situations. • Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise • When carrying a portable radio, cellular phone, cordless phone or other wireless communication device ●When the vehicle is parked, the time taken for the warning to start or go off could be extended. ●When tire inflation pressure declines rapidly for example when a tire has burst, the warning may not function. ■The initialization operation (vehicles with the tire pressure warning sys- tem) ●Make sure to carry out initialization after adjusting the tire inflation pressure. Also, make sure the tires are cold before carrying out initialization or tire inflation pressure adjustment. ●If you have accidentally turned the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system) during initialization, it is not necessary to restart the ini- tialization again as initialization will restart automatically when the engine switch has been turned to the “ON” position (vehicles without a smart entry & start system) or IGNITION ON mode (vehicles with a smart entry & start system) for the next time. ●If you accidentally start the initialization when initialization is not necessary, adjust the tire inflation pressure to the specified level when the tires are cold, and conduct initialization again. AVENSIS_OM_OM20C20E_(EE)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders