Subaru XV Crosstrek owners manual page 422

text version of content this owner's manual page from owners manual to the vehicle Subaru XV, year of production 2011:

Starting and operating/Remote engine start system (dealer option)7-19 &Entering the vehicle while it&Entering the vehicle follow-3. Depress and hold the brake pedal is running via remote start ing remote engine start shut-4. Turn the ignition switch to the “ON” 1. Unlock the vehicle doors using thedown position keyless access function (if equipped) orAnalarmtrigger mayoccurif the vehicle is5. Press and release the remote engine remote keyless entry system. If the vehi-opened by the remote keyless entrystart transmitter “ ” button three times. cle’s doors are unlocked manually usingtransmitter within a few seconds immedi-The system will honk the vehicle’s horn the key, the vehicle’s alarm system willately following remote engine start shut-each time the button is pressed. trigger (if the alarm system is armed priordown. 6. The system will pause for 1 second to activating the remote engine start then honk the vehicle’s horn three times to system) and the engine will turn off. & Pre-heating or pre-coolingindicate that the service mode has been Perform either of the following proceduresthe interior of the vehicleengaged or honk one time to indicate that to disarm the alarm system. Refer to the service mode has been disengaged. “Alarm system” F2-27. Before exiting the vehicle, set the tem- . Insert the key into the ignition switchperature controls to the desired settingNOTE andturnit to the “ON” position (modelsand operation. After the system starts the engine, the heater or air conditioning willWhentakingyourvehicleinforservice, without “keyless access with push-activate and heat or cool the interior toit is recommended that you inform the button start system”) your setting. service personnel that your vehicle is . Turn the push-button ignition switch equipped with a remote engine start to the “ACC” or “ON” position (models&Service mode (models with-system. with “keyless access with push-buttonout “keyless access with start system”) push-button start system”) &Remotetransmitter program . Press any button on the access key/ (models without “keyless ac- remote keyless entry transmitter.In service mode, the remote engine startcess with push-button start 2. Enter the vehicle. function is temporarily disabled to preventsystem”) 3. The engine will shut down when anythe system from unexpectedly starting the engine while being serviced. New transmitters can be programmed to door or trunk/rear gate is opened. the remote engine start system in the 4. Insert the key into the ignition switchTo engage or disengage service mode:event that a transmitter is lost, stolen, and turn to the “START” position to restart1. Enter the vehicle and close all vehicledamaged or additional transmitters are the engine. doors and the trunk/rear gate.desired (the system will accept up to eight 2. Verify that the select lever is in the “P”transmitters). New remote engine start position (CVT models) transmitters can be programmed accord- – CONTINUED –

owners manual Subaru XV

owners manual Subaru XV - year of production: 2011 - Subaru XV Crosstrek owners manual EN