owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating/Continuously variable transmission7-27 ! N(Neutral) ! D(Drive) NOTE This position is for restarting a stalledThis position is for normal driving. TheThe transmission may downshift, de- engine. In this position, the transmission istransmission shifts automatically and con-pending on the way the accelerator neutral, meaning that the wheels andtinuously into a suitable gear according topedal is depressed to accelerate the transmission are not locked. Therefore,the vehicle speed and the accelerationvehicle again. the vehicle will roll freely, even on theyou require. Also, while driving up and slightest incline unless the parking brakedown a hill, the transmission assists and&Shift lock function or foot brake is applied. controls the driving performance and engine braking while corresponding toThe shift lock function helps prevent the Avoid coasting with the transmission inthe road grade. improper operation of the select lever. neutral. Engine braking has no effect inWhenmoreacceleration is required in “D”. The select lever cannot be operated this condition. position, depress the accelerator pedalunless the ignition switch is turned to the fully to the floor and hold that position. The“ON” position and the brake pedal is WARNING transmission will automatically downshift.depressed. Do not drive the vehicle with theIn this case, the transmission will operate. Theselect lever cannot be moved from select lever in the “N” (neutral)like a conventional automatic transmis-the “P” position to any other position position. Engine braking has nosion. When you release the pedal, thebefore the brake pedal is depressed. effect in this condition and the risktransmission will return to the original gearDepress the brake pedal first, and then of an accident is consequently in-position. operate the select lever. creased. To use the manual mode, move the lever. Only the “P” position allows you to turn from this position into the manual gate.the key from the “ACC” position to the “LOCK” position and remove the key from NOTE !While climbing a grade the ignition key cylinder (models without If the select lever is in the “N” positionWhendrivingupahill, undesired upshift is“keyless access with push-button start when you stop the engine for parking,prevented from taking place when thesystem”). you may not subsequently be able toaccelerator is released. This minimizes. Only the “P” position allows you to turn moveit to the “R” and “P” positions. Ifthe chance of subsequent downshifting tothe push-button ignition switch to the this happens,turntheignitionswitchtoa lower gear when accelerating again.“OFF” position (models with“keyless the “ON”position. Youwill then be ableThis prevents repeated upshifting andaccess with push-button start system”). to move the select lever to the “P”downshifting resulting in a smoother op-. If the ignition switch is turned to the position. eration of the vehicle. “LOCK”/“OFF” position while the select lever is in the “N” position, the select lever – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders