owners manual Hyundai Veloster

all ratings: 0 average rating: 5

Maintenance Position light (if equipped) Front fog light bulbs (if equipped) If the light is not operating, we recom- 1. Remove the under cover by rotating mend that you checked an authorized the screws. HYUNDAI dealer. 2. Reach your hand into the back of the front bumper. 3. Disconnect the power connector from the socket. 4.Remove the bulb-socket from the housing by turning the socket counter clockwise until the tabs on the socket align with the slots on the housing. OFS072042L5. Install the new bulb-socket into the Turn signal light housing by aligning the tabs on the socket with the slots in the housing. 1. Remove the bulb from the socket by Push the socket into the housing and pressing it in and rotating it counter- turn the socket clockwise. clockwise until the tabs on the bulb 6. Connect the power connector to the align with the slots in the socket.Pull socket. the bulb out of the socket. 2. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 3. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 7 76

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders