owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN

Document: pdf (60.3 MB) 434 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Tools and jack 8.If the reserve tank needs coolant, you will 5.If you do not see steam or spray coming Tools and jack from under the hood, leave the engine onprobably also need to add coolant to the N00836600265 until the bar graph for the engine coolantradiator. Do not loosen or remove the temperature warning display on the multi- radiator cap until the engine has cooled down. Storage information display goes down. When it is in the middle of the normal zone, you can start driving again. If the bar graph WARNING The tools and jack are stowed in the trunk. stays in the red zone, turn off the engine. Removing the radiator cap could scald you with escaping hot water or steam. WARNING When checking the radiator level, cover the cap with a cloth before trying to Before raising the engine hood, check to remove it. Turn it slowly counterclock- see if there is steam or spray coming from wise, without pressing down, to the first under the hood. Steam or spray coming notch. The pressure in the system will then 8 from an overheated engine could seriously scald you. be let out. When the pressure is COM- PLETELY LET OUT, press down and Do not open the hood until there is no steam or spray. keep turning the cap counterclockwise until it will come off. 6.When you do not see any more steam or 1- Tools 9.Start the engine, and slowly add coolant, spray, open the hood. Look for obvious 2-Jack up to the bottom of the filler neck. Use leaks, such as a split radiator hose. Be plain water if you have to (and replace it careful as components will be hot. Any leak source must be repaired. with the right coolant as soon as possible). 10.Replace the radiator cap and tighten it 7.If there is no obvious leak source, check fully. Check the engine coolant tempera- the coolant level in the reserve tank. If there is none, or if it is too low, slowly add ture display on the multi-information dis- coolant. play. You can start driving again when the bar graph for the engine coolant tempera- ture display returns to the normal zone. 11.Have your vehicle checked by your autho- rized Mitsubishi Motors dealer or a repair facility of your choice. For emergencies 8-5

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Lancer
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.