owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN

Document: pdf (60.3 MB) 434 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Jump-starting the engine 7.Connect one end of the other jumper cable 4.Make sure your battery electrolyte is at6.Connect one end of one jumper cable to the proper level. (Refer to “Checking bat-the positive (+) terminal of the dischargedto the negative (-) terminal of the booster tery electrolyte level” on page 9-15.)battery (A), and the other end to the posi-battery (B), and the other end to the tive (+) terminal of the booster batteryengine block of the vehicle with the low WARNING (B). battery (A) at the point farthest from the battery. If the electrolyte fluid is not visible, or looks frozen, DO NOT ATTEMPT JUMP STARTING!! WARNING The battery might split open or explode if Be sure to follow the proper order when the temperature is below the freezing connecting the batteries, of: point or if it is not filled to the proper level. . Make sure that the connection is made 5.For vehicles equipped with turbocharger, to the engine properly. If the connection is 8 remove the air duct and then the battery directly made to the negative side of the upper cover. battery, the flammable gases from inside the battery might catch fire and explode, (Refer to “Removing and installing the NOTE causing personal injury. battery upper cover” on page 9-14.) When connecting the jumper cable, do not Open the terminal cover before connecting connect the positive (+) cable to the nega- the jumper cable to the positive terminal of tive (-) terminal. Otherwise sparks can the battery. make the battery explode. (Refer to “Disconnection and connection” on page 9-16.) Use the proper cables suitable for the battery size. CAUTION Make sure that the jumper cable will not be Otherwise heat damage to the cables could result. caught in the cooling fan or other moving parts in the engine compartment. Check the jumper cables for damage and cor- rosion before use. For emergencies8-3

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Lancer
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.