owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN

Document: pdf (21.01 MB) 388 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 5 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Engine oil Engine oil 6.Remove the dipstick and read the oil Recommended engine oil vis- level, which should always be within the E01000404039 range indicated cosity To check and refill engine oil 7.If the oil level is below the specified limit, remove the cap located on the cylinder head cover and add enough oil to raise the level to within the specified range. Do not FULL LOW overfill to avoid engine damage. Be sure to use the specified engine oil and do not mix various types of oil. 8.After adding oil, close the cap securely. 9.Confirm the oil level by repeating step 4 to 6. NOTE zSelect engine oil of the proper SAE vis- zThe engine oil will deteriorate rapidly if the cosity number according to the atmos- The engine oil used has a significant effect on vehicle is subjected to severe conditions, pheric temperature. the engine’s performance, service life and requiring earlier oil replacement. SAE 0W-20, 0W-30, 5W-30, and 5W-40 11 startability. Be sure to use oil of the recom- Please refer to the maintenance schedule. engine oils can only be used if they meet mended quality and appropriate viscosity. zFor information on how to dispose of used ACEA A3/B3, A3/B4 or A5/B5 and API All engines consume a certain amount of oil engine oil, refer to page 2-15. SG (or higher) specifications. during normal operation. Therefore, it is zUse engine oil conforming to the follow- important to check the oil level at regular ing classification: intervals or before starting a long trip. •API classification: “For service SG” or higher 1.Park the car on a horizontal surface. •ILSAC certificated oil 2.Switch off the engine. •ACEA classification: 3.Wait a few minutes. “For service A1/B1, A3/B3, A3/B4, or 4.Remove the dipstick and wipe it with a A5/B5” clean cloth. 5.Reinsert the dipstick as far as it goes. Maintenance 11-5

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Outlander PHEV
year of production from: 2012

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.