owners manual Seat Altea

all ratings: 0 average rating: 5

32 Airbag system Monitoring of airbag and belt tension device systemRepair, care and disposal of the airbags The functionality of the airbag and belt tension device system is constantly monitored electronically. Each time the ignition is switched on, the warning The parts of the airbag system are installed in various places in your vehicle. lamp T lights for several seconds and the display in the instrument panel* If you work on the airbag system or remove and install parts of the system shows AIRBAG / TENSIONER. when performing other repair work, parts of the airbag system may be The system must be checked when the warning lamp T :damaged. The consequence may be that, in the event of an accident, the • does not come on when the ignition is switched on,airbag inflates incorrectly or does not inflate at all. • does not go out about 4seconds after the ignition is switched on,The relevant safety requirements must be observed when the vehicle or • goes out and then comes on again after the ignition is switched on,components of the airbag are scrapped. The specialist workshops and the Vehicle disposal centres are familiar with these requirements. • or if it comes on or flickers while the car is moving. In the event of a malfunction, the warning lamp remains on continuously. In WARNING addition, depending on the malfunction, a fault message appears in the • If repairs are not carried out by a professional, or if the airbags are used display of the combi-instrument for approx. 10 seconds and a shor t acoustic incorrectly, the risk of severe or fatal injuries is increased. The airbags may signal is given. In this event, you should have a qualified workshop check the fail to inflate, or could inflate in the wrong circumstances. system immediately. • Do not cover or stick anything on the steering wheel hub or the soft If any of the airbags are deactivated by the Authorised Service Centre, the plastic surface of the airbag unit on the passenger side of the dashboard, indicator lights for several seconds more after the verification and will turn off and do not obstruct or modify them in any way. if there is no fault. • It is important not to attach any objects such as cup holders or tele- phone mountings to the surfaces covering the airbag units. WARNING • To clean the steering wheel or dash panel, you may use only a dry cloth • If there is a malfunction, the airbag and belt tension device system or one moistened with water. Never clean the dash panel and surface of the cannot properly perform its protective function.airbag module with cleansers containing solvents. Solvents cause the • If a malfunction should occur, have the system checked immediately by surface to become porous. If the airbag inflates, disintegrating plastic a qualified workshop. Otherwise there is a risk that, in the event of an acci-parts can cause substantial injuries. dent, the airbag system and belt tension devices may not be triggered, or • Never attempt to repair, adjust, remove or install parts of the airbag may not be triggered correctly. system. • Any work on the airbag system or removal and installation of the airbag components for other repairs (such as repairs to the steering wheel) should be performed only by a qualified workshop. Qualified workshops have the necessary tools, repair information and qualified personnel.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders