or
owners manual Mitsubishi Outlander PHEV
owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN
Document:
pdf (21.01 MB) 388 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:
B00203201E3.book 23 ページ 㸰㸮㸯㸱年㸯㸯月㸯9日 火曜日 午前㸯㸯時5㸮分
Operation under adverse driving conditions
On a flooded road (c)Always maintain the specified tyre infla-zAccumulation of ice on the braking sys-
tion pressures. tem can cause the wheels to lock. Pull
zDo not drive on a flooded road. If you away from a standstill slowly after con-
drive on a flooded road, not only the Plug-On a snow-covered or frozen firming safety around the vehicle.
in Hybrid EV System stops but also a fail-road CAUTION
ure like electric leakage or short circuit zDo not press the accelerator pedal rapidly. If
may occur. zWhen driving on a snow-covered or fro-the wheels break free of the ice, the vehicle
If you inevitably had to run on a floodedzen road, it is recommended that you usecould suddenly start moving and possibly
road and the vehicle was exposed tosnow tyres or snow traction device (tyrecause an accident.
water, be sure to have your vehiclechains).
inspected by a MITSUBISHI MOTORS Refer to the “Snow tyres” and “Snow
Authorised Service Point. traction device (tyre chains)” sections.On a bumpy or rutted road
zIf there is water on the brakes after driv-zAvoid high-speed operation, sudden
ing through puddles or washing the vehi-acceleration, abrupt brake application andDrive as slow as possible when driving on
cle, resulting in temporarily ineffectivesharp cornering. bumpy or rutted roads. 9
brakes. In such cases, lightly depress thezDepressing the brake pedal during travel
brake pedal to see if the brakes operateon snowy or icy roads may cause tyre
properly. If they do not, lightly depressslippage and skidding. When tractionCAUTION
the pedal several times while driving inbetween the tyres and the road is reducedzThe impact on tyres and/or wheels when
order to dry the brake pads. the wheels may skid and the vehicle can-driving on a bumpy or rutted road can dam-
zWhen driving in rain or on a road withnot readily be brought to a stop by con-age the tyre and/or wheel.
many puddles a layer of water may formventional braking techniques. Braking
between the tyres and the road surface.will differ, depending upon whether youThis vehicle is intended for driving mainly
This reduces a tyre’s frictional resistancehave anti-lock brake system (ABS). Ason roads with firm surface.
on the road, resulting in loss of steeringyour vehicle is equipped with ABS, brake4WD system makes possible driving on roads
stability and braking capability. by pressing the brake pedal hard, andwithout special coverage, on flat and firm
To cope with this, observe the followingkeeping it pressed. surface. Please, remember that off-road abil-
items: zAllow extra distance between your vehi-ity of your vehicle is limited. Your vehicle is
cle and the vehicle in front of you, andnot intended for driving in heavy off-road,
(a)Drive your vehicle at a slow speed.avoid sudden braking. overcoming the rugged terrain, deep ruts, etc.
(b)Do not drive on worn tyres.
For emergencies9-23
Download PDF
Click here to download a pdf file with an instruction manual for Mitsubishi Outlander PHEV
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Mitsubishi Outlander PHEV III 3 owners manual
pages 331 - 337
Mitsubishi Outlander PHEV III 3 owners manual
page 334 / 388
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: