Replacing components
Onboard tool kit e
anc
The onboard tool kit is stored in a tool pouch. l
g
a
Roadster t
A
The onboard tool kit can be found on the right-
hand side of the cargo bay on top of the battery.
ls
o
r
t
MMobility System n
The onboard tool kit can be found on the right- Co
hand side of the cargo bay in a compartment Repairing a flat tire
next to the battery cover. To repair a flat tire, an M Mobility System is pro-
Coupe: access to onboard tool kitvided in your BMW Z4 M Roadster/Z4 M Coupe.
Using this system you can apply a sealant to the
1. Turn the quick-release fastener counter-inside of the tire, seal off the damaged area,
clockwise. restore the tire inflation pressure and then con-s
tinue driving.
Safety measures in the event of a flat:g tip
Park the vehicle as far as possible from in
iv
passing traffic and on solid ground. Switch on r
the hazard warning flashers. D
Lock the steering wheel so that the wheels are
facing straight ahead. Apply the handbrake and
engage first or reverse gear. Have all vehicle
occupants get out of the vehicle and ensure
2. Pull out the cover. that they remain outside the immediate area in a
safe place, such as behind a guardrail.
When reinstalling the cover, make sure If a warning triangle or portable hazard warning y
that its tabs are inserted into the corre-lamp is required, set it up on the roadside at an ilit
sponding cut-outs in the cargo bay trim panel.
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser