Audi A4 B8 owners manual page 32

text version of content this owner's manual page from owners manual to the vehicle Audi A4, year of production 2008 - 2015:

document_0900452a81b1b9de.book Seite 30 Donnerstag, 26. Juli 2007 9:16 09 30 Driver information system • Speed warning - to set the speed above which a warning signal If one or more faults are detected, the driver information message will sound. (as above) will disappear about 15 seconds after the engine has Speed limit warning 2 can be adjusted in increments of 10 km/h been started and the appropriate fault symbol(s) will appear in the between 30 and 240 km/h. display. The warning display will be accompanied by the corre- sponding warning chime. Auto-check control Applies to vehicles: with speed warning function Driver messages Introduction Additional messages to assist the driver are displayed The auto-check control checks important components and vehicle together with the warning symbols in the instrument systems. These background checks are run constantly, as long as cluster. the ignition is switched on. A message is displayed in the instrument cluster if a fault should occur or if any maintenance or repairs are urgently required. This is accompanied by an audible warning signal. Depending on the priority of the fault, a red or yello w warning symbol lights up in the display. The red symbols indicate a serious malfunction, whereas the yellow ones represent other malfunctions or items requiring attention. Additional messages to assist the driver may be shown with the red Fig. 24 Instrument or yellow symbols. cluster: SET button Automatic gearbox* function test For example, the following driver me ssage will appear if the selector The auto-check control automatically checks the vehicle systems lever for the automatic gearbox* is not in position P when you when the ignition is switched on. If the selector lever is in position switch off the engine: P or N, the following instruction will appear: Shift to P, otherwise vehicle can roll away. Doors do not lock if When stationary apply footbrake while selecting gear lever is not in P. When a gear (R, D etc.) is selected, this message disappears and the The ignition key can only be withdrawn when the selector lever is in auto-check control function is displayed. this position. Similar messages will be displayed if other functions The driver message will disappear 30 seconds after switching on of this kind cannot be carried out. the ignition or earlier, if there are other driver messages or malfunc-Driver messages and red symbols tions. If a red warning symbol appears in the display, it will automatically be accompanied by the corresponding driver message.

owners manual Audi A4

owners manual Audi A4 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi A4 B8 owners manual EN