owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US 2010-05-20T09:17:30+02:00 - Seite 309 hereepe Version: 3.0.3.6 Service products and capacities 309 Model Engine MB model Approval C 350 272 229.5 48 C 350 4MATIC 272 229.5 49 C 63 AMG 156 229.5 iMB Approval is stated on the containers. Lubricant additives ! Do not mix any lubricant additives with Refrigerant of the air-conditioning the engine oil. This could damage the system engine. Damage resulting from the use of The air-conditioning system is filled with such lubricant additives in the engine oil is R134a refrigerant and a special PAG not covered by the Mercedes-Benz Limited lubricant. Warranty. ! Never use refrigerant R 12 (CFC) or Engine oil viscosity mineral lubricants. Otherwise, you could damage the air-conditioning system. Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity Brake fluid means that it is thin. Using the table below, make sure that the SAEWarning! G classification (viscosity) is sufficient for the The brake fluid constantly absorbs moisture temperatures at which the vehicle is from the air; this lowers its boiling point. operated. The low temperature If the boiling point of the brake fluid is too low, characteristics of engine oils can deteriorate vapor pockets may form in the brake systemTechnical data significantly, e.g. by aging, soot and fuel when the brakes are applied hard (e.g. when deposits. It is therefore recommended that driving downhill). This would impair braking you carry out oil changes regularly using an efficiency. approved engine oil with the appropriate SAE You should have the brake fluid renewed at classification. regular intervals. The brake fluid change intervals can be found in the Service Booklet. Only use brake fluid approved by Mercedes- Benz. Information about approved brake fluids can be obtained from any authorized Mercedes-Benz Center. 48 Canada only. 49 Restriction: only SAE 0W-40 or SAE 5W-40 engine oils may be used. Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders