owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN

Document: pdf (12.9 MB) 378 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

BODY -SHEET METAL PANELS (2) Electrodeinstallment. Operate such as sheet forms a tight angle with electrodes. if not so, current flow will be low and the obtained welding streng.ht insufficient. (3) Welding of three or more overlapped sheets. In the areas where three or more sheets are overlapped, spot welding must be repeated. INCORRECT INCORRECT CORRECT (2) Welding of metal surfaces. Prepare the surfaces to be welded, removing all impurities and foreign matters (paint, dust, rust) in order to obtain perfect welding. In casa three or more overlapped sheets ara welded, repeat welding twice. (4) Number of spot welding points. Generally, efficiency of spot welders available in the Repair Shop is lower than efficiency of spot welders used at the Factory. As consequence, the number of spot welding points performed at the Service Shop should be increased by 20 ” 30% with respect to weldings performed at the Factory. (5) Minimum welding pitch. The minimum welding pitch is function of thickness of sheet to be welded. Generally, the values provided in the following table, should be observed. (3) Anti-corrosion procedureapplicable to all metal surfaces. ThicknB (t) Minimum pitch (I) Coat the surface tobe+ welded high conductivity mm (in) mm (in) anti-corrosion agent. It must beapplyed to end of surface to be welded, also. 0.6 IO.0241 10 (0.39) or more 0.8 (0.031) 12 (0.47) or mare 1.0 (0.039) 18 (0.71) or more 1.2 (0.047) 20 (0.79) or more 1.6 (0.063J 27 (1.06) or more 1.8 (0.071) 31 (1.22) ormom Preliminary operation Apply anti-corrosion agent to the whole surface, end included. 1 I I 3. Cautions during spot welding (I) Spot welding selection Use the direct welding method (for the parts this method can not be applied to, use theMIG welding method). May 1983

Download PDF

Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.