owners manual Ford Edge

all ratings: 0 average rating: 5

Wheels and Tires 11. After 4 miles (6 kilometers), stop and 3. Push and turn the dial clockwise to the check the tire pressure. See Second air position. Stage: Checking Tire Pressure. 4. If required, switch on the compressor Note:If you experience any unusual and adjust the tire to the vibration, ride disturbance or noise while recommended inflation pressure driving, reduce your speed until you can shown on the tire label located on the safely pull off to the side of the road to call driver's door or door jamb area. You for roadside assistance. Note: Do not should check the tire pressure with the proceed to the second stage of this compressor turned OFF in order to get operation. an accurate pressure reading. Second Stage: Checking Tire 5. Unplug the hoses, re-install the valve Pressure cap on the tire and return the kit to the stowage area. WARNINGS What to Do After the Tire has Been If you are proceeding from the First Sealed Stage: Re-inflating the Tire with After using the kit to seal your tire, you will Sealing Compound and Air section need to replace the sealant canister. You and have injected sealant in the tire and can obtain sealant canisters and spare the pressure is below 20 psi (1.4 bar), parts at an authorized Ford dealer. You can continue to the next step. dispose of empty sealant canisters at The power plug may get hot after use home. However, you should dispose of and should be handled carefully canisters still containing liquid sealant while unplugging. through your local authorized Ford dealer Check the air pressure of your tires as or tire dealer, or in accordance with local follows: waste disposal regulation. Note:After you use the sealing compound, the maximum vehicle speed is 50 mph (80 km/h) and the maximum driving distance is 120 mi (200 km). You should inspect the sealed tire immediately. You can check the tire pressure any time within the 120 mi (200 km) by performing the steps listed previously in the Second Stage: Checking Tire Pressure procedure. E175983 1. Remove the valve cap from the tire valve. 2. Firmly screw the air compressor hose onto the valve stem by turning clockwise. 296 Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders