owners manual Ford Edge

all ratings: 0 average rating: 5

Wheels and Tires 5. Remove the warning sticker found on gauge reading will indicate the tire the casing/housing and place it on the inflation pressure after about 30 top of the instrument panel or the seconds of operation. You should center of the dash. check the final tire pressure with the 6. Start the vehicle and leave the engine compressor turned OFF in order to get running so the compressor does not an accurate pressure reading. drain the vehicle’s battery. E175982 E175981 9. When the tire reaches the 7. Turn dial (A) clockwise to the sealant recommended tire pressure, switch off position. Switch the kit on by pressing the kit, unplug the power cable, and the on/off button (B). disconnect the hose from the tire valve. 8. Inflate the tire to the pressure listed on Re-install the valve cap on the tire the tire label located on the driver's valve and return the kit to the stowage door or the door jamb area. The initial area. air pressure gauge reading may indicate 10. Immediately and cautiously, drive the a value higher than the label pressure vehicle 4 miles (6 kilometers) to while you pump the sealing compound distribute the sealant evenly inside into the tire. This is normal and should the tire. Do not exceed 50 mph (80 be no reason for concern. The pressure km/h). 295 Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders