owners manual Volvo XC60

all ratings: 0 average rating: 5

06 During your trip Towing a trailer NOTE Detachable trailer hitch (accessory) 4. Slide the locking bolt through the hitch • When parking the vehicle with a trailer assembly/ball holder. on a hill, apply the parking brake before 5. Insert the cotter pin in the hole at the end putting the gear selector in P. Always of the locking bolt. follow the trailer manufacturer's recom- Removing the ball holder mendations for wheel chocking. 1. Remove the cotter pin from the locking bolt • When starting on a hill, put the gear C and slide the locking bolt out of the ball selector in D before releasing the park- holder/hitch assembly. ing brake. See also page 123 for more detailed information about starting off D E 2. Pull the ball holder out of the hitch assem- on a hill while towing a trailer. B bly. • If you use the manual (Geartronic) shift A G010496 positions while towing a trailer, make NOTE sure the gear you select does not put Ball holder A cover for the hitch assembly is also too much strain on the engine (using too Locking bolt included in the kit. high a gear). • The drawbar assembly/trailer hitch may Cotter pin be rated for trailers heavier than the Hitch assembly Trailer Stability Assist (TSA) vehicle is designed to tow. Please Trailer Stability Assist is a system designed to 06 adhere to Volvo's recommended trailer Safety wire attachment help stabilize a vehicle that is towing a trailer weights. when the vehicle and trailer have begun to • Avoid driving with a trailer on inclines of Installing the ball holder sway and is part of the Dynamic Stability and more than 15 %. 1. If necessary, remove the cotter pin from Traction Control system (DSTC). See page the locking bolt and slide the locking bolt 149 for information on DSTC. Trailer cable out of the hitch assembly. Function An adapter is required if the vehicle's trailer 2. Slide the ball holder into the hitch assem- A vehicle towing a trailer may begin to sway for hitch has a 13-pin connector and the trailer has bly. various reasons. Normally this only occurs at 7 pins. Use an adapter cable approved by 3. Align the hole in the ball holder with the one high speeds but, for example, if the trailer is Volvo. Make sure the cable does not drag on in the hitch assembly. overloaded or if the load is unevenly distributed the ground. in the trailer, there is risk of swaying at speeds  279

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders