owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 276 Montag, 30. August 2010 4:45 16 276 If and when Position of the bulbs – Fit the new bulb, pressing it into the bulb holder and turn it to the Pos. ⇒page275, Bulb function right as far as it will go. fig. 213 – Use a cloth to remove any fingerprints from the glass part of the A Brake light and side light bulb. B Side lights – Check whether the new bulb is working. C Turn signal – Re-install the bulb holder ⇒ page 276. Changing bulbs. LED lamps Position of the bulbs All bulbs can be changed easily in the bulb holder.Pos. ⇒fig. 214Bulb function A Turn signal Note • It is only possible to change the turn signal light. • If the brake light and/or side lights with LEDs have to be replaced, the tail light must be replaced. Fitting the bulb holder Fig. 214 Position of the The bulb holder is easy to fit. bulb on the bulb holder. Example: Left tail light in side panel – Position the bulb holder on the tail light and align it so that it is securely seated. The bulb is secured with a bayonet fastener. The table below gives – Press the bulb holder into the tail light until it engages. an overview of the bulb positions. – Lightly press the defective bulb into the bulb holder, then turn it – Re-install the tail light unit ⇒ page 277. to the left and remove it.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders