owners manual Seat Ateca

all ratings: 0 average rating: 5

Advice Camera sensors and lensesger forms droplets and rolls off the cleanTrims paintwork. ●Use a small brush to remove snow and a In respect for the environment, the silver- Even if a wax solution is used regularly in the de-icer spray to remove ice. plated trims on the body are made of pure vehicle washing tunnel, it is advisable to pro- aluminium (they do not contain chrome). ●Clean the sensors with a solvent-free prod- tect the paint with a hard wax coating at least uct and a soft, dry cloth. twice a year. Dirt or marks on the trim mouldings should ● be removed with a cleaning product with a Moisten the camera lens using a standard In the summer, you will find it is much easier neutral PH (do not use a chrome cleaner). alcohol-based glass cleaning agent and to remove dead insects (which accumulate Body polish is also unsuitable for use on trim clean the lens with a dry cloth. In the active on the bumper and the front of the bonnet) if mouldings. The intensive cleaning fluids of- lane assist*, the area in front of the lens is the car has been treated with care products ten used before the car goes into a car wash normally cleaned with the windscreen wash- recently. may contain alkaline substances, which can er. cause dull or milky patches when they dry Polishing CAUTION out. Polishing is only necessary if the paint has ● When you clean the vehicle with a pressure SEAT Official Services carry stocks of cleaning lost its shine, and the gloss cannot be washer: products which have been tested for use on brought back by putting on wax. your vehicle and are not harmful to the envi- – Stay a suitable distance from the sensors If the polish does not contain wax, a waxronment. on the front and rear bumpers. product should be applied after polishing. – Do not clean the camera lenses or sur- rounding area with the pressure washer. CAUTION Plastic parts ● Never use warm or hot water to remove ● Do not use polishes and hard wax on pain- snow and ice from the reverse camera lens, ted parts with a matt finish or on plasticPlastic parts are cleaned with a power wash- as it could crack the lens. parts. er. If this is not sufficient, plastic parts ● Never use abrasive cleaning agents on the should only be treated with a special solvent- ● Do not apply paint polishes to the side trim lens. free plastic cleaning agent. Do not use paint- that runs around the panoramic roof and ends on the windscreen. However, it can be treatedwork cleaners, polishes or wax on plastic with hard wax. parts. Waxing and polishing Care Waxing protects the paintwork. It is time to apply a coat of good wax when water no lon- 268

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders