owners manual Subaru Forester

all ratings: 0 average rating: 5

Appearance care 10-3 of the high temperature, high pressuresize number and could damage the paint.Corrosion protection type, and they can damage or deform theAfter polishing with a compound, coat with resin parts such as mouldings, or causewax to restore the original luster. FrequentYour SUBARU has been designed and water to leak into the vehicle. polishing with a compound or an incorrectbuilt to resist corrosion. Special materials polishing technique will result in removingand protective finishes have been used on Waxing and polishing the paint layer and exposing the under-most parts of the vehicle to help maintain Always wash and dry the vehicle beforecoat. When in doubt, it is always best tofine appearance, strength, and reliable waxing and polishing. contact your SUBARU dealer or an autooperation. Use a good quality polish and wax and ap-paint specialist. ply them according to the manufacturer’sNOTE Most common causes of cor- instructions. Wax or polish when the paint-Be careful not to block the windshieldrosion ed surface is cool. washer nozzles with wax when waxingThe most common causes of corrosion Be sure to polish and wax the chrome trim,the vehicle. are: as well as the painted surfaces. Loss ofCleaning aluminum wheels 1. The accumulation of moisture retaining wax on a painted surface leads to loss of dirt and debris in body panel sections, the original luster and also quickens thePromptly wipe the aluminum wheelscavities, and other areas. deterioration of the surface. It is recom-clean of any kind of grime or agent. If dirt2. Damage to paint and other protective mended that a coat of wax be applied atis left on too long, it may be difficult tocoatings caused by gravel and stone least once a month, or whenever the sur-clean off. chips or minor accidents. face no longer repels water. Do not use soap containing grit to cleanCorrosion is accelerated on the vehicle If the appearance of the paint has dimin-the wheels. Be sure to use a neutral clean-when: ished to the point where the luster or toneing agent, and later rinse thoroughly with1. It is exposed to road salt or dust control cannot be restored, lightly polish the sur-water. Do not clean the wheels with a stiffchemicals, or used in coastal areas where face with a fine-grained compound. Neverbrush or expose them to a high-speedthere is more salt in the air, or in areas polish just the affected area, but includewashing device. where there is considerable industrial pol- the surrounding area as well. Always pol-Clean the vehicle (including the alumi-lution. ish in only one direction. A No. 2000 grainnum wheels) with water as soon as possi-2. It is driven in areas of high humidity, es- compound is recommended. Never use able when it has been splashed with seapecially when temperatures range just coarse-grained compound. Coarserwater, exposed to sea breezes, or drivenabove freezing. grained compounds have a smaller grain-on roads treated with salt or other agents.3. Dampness in certain parts of the vehi- cle remains for a long time, even though – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders