owners manual Subaru Forester

all ratings: 0 average rating: 5

10-2 Appearance care Exterior care Appearance care NOTE components, such as the exhaust system, When having your vehicle washed in fuel and brake lines, brake cables, floor Washing an automatic car wash, make sure be- pan and fenders, and suspension. forehand that the car wash is of suit- Thoroughly flush the underbody and in- able type. side of the fenders with lukewarm or cold The best way to preserve your vehicle’s water at frequent intervals to reduce the When washing the vehicle, the beauty is frequent washing. Wash the ve- harmful effects of such agents. brakes may get wet. As a result, hicle at least once a month to avoid con- Mud and sand adhering to the underbody the brake stopping distance will tamination by road grime. components may accelerate their corro- be longer. To dry the brakes, drive sion. the vehicle at a safe speed while Wash dirt off with a wet sponge and plenty After driving off-road or muddy or sandy lightly pressing the brake pedal to of lukewarm or cold water. Do not wash roads, wash the mud and sand off the un- heat up the brakes. the vehicle with hot water and in direct derbody. Do not wash the engine compart- sunlight. Carefully flush the suspension and axle ment and area adjacent to it. If wa- Salt, chemicals, insects, tar, soot, tree sap parts, as they are particularly prone to ter enters the engine air intake, and bird droppings should be washed off mud and sand buildup. Do not use a electrical parts or the power steer- by using a light detergent, as required. If sharp-edged tool to remove caked mud. ing fluid reservoir, it will cause en- you use a light detergent, make certain NOTE gine trouble or faulty power steer- that it is a neutral detergent. Do not use Be careful not to damage brake hoses, ing respectively. strong soap or chemical detergents. All sensor harnesses, and other parts Since your vehicle is equipped cleaning agents should be promptly when washing suspension compo- with a rear wiper, automatic car- flushed from the surface and not allowed nents. wash brushes could become tan- to dry there. Rinse the vehicle thoroughly Using a warm water washer gled around it, damaging the wip- with plenty of lukewarm water. Wipe the er arm and other components. remaining water off with a chamois or soft Keep a good distance of 12 in (30 cm) Ask the automatic car-wash oper- cloth. or more between the washer nozzle and ator not to let the brushes touch Washing the underbody the vehicle. the wiper arm or to fix the wiper Chemicals, salts and gravel used for deic- Do not wash the same area continuous- arm on the rear window glass with ing road surfaces are extremely corrosive, ly. adhesive tape before operating accelerating the corrosion of underbody If a stain will not come out easily, wash the machine. by hand. Some warm water washers are

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders