owners manual Suzuki Grand Vitara

all ratings: 1 average rating: 5

Automatic Transmission Fluid: 10 Engine Coolant: 1, 2 INSPECTION AND MAINTENANCE Engine Coolant Replacement EXAMPLE Open Close 66J191 64J191 66J151 3) Loosen the drain plug attached to the 1) When the engine is cool, remove the WARNING lower part of the radiator and drain the radiator cap by turning it slowly to the It is hazardous to remove the radiator engine coolant into a suitable container. left until a “stop” is felt. Do not press 4) Reinstall the reservoir and fill it with down while turning the cap. Wait until cap when the engine coolant temper- engine coolant to the “FULL” line. ature is high, because scalding fluid any pressure is released, then press 5) Tighten the drain plug on the radiator, and steam may be blown out under down on the cap and continue turning itpressure. Wait until the engine cool- fill the radiator with engine coolant and to the left. install the radiator cap. ant temperature has lowered before removing the cap. 6) After filling, let the engine idle for about 2 – 3 minutes to get rid of air in the 2) Remove the reservoir by lifting it up, cooling system. Then, stop the engine. and drain the reservoir completely. 7) Check the engine coolant level in the radiator again. If the level has gone down, add more engine coolant. CAUTION The engine coolant must be replaced with the vehicle on level ground. 7-15 79K21-03E

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders