owners manual Suzuki Grand Vitara

all ratings: 1 average rating: 5

Engine Oil and Filter: 1, 2 INSPECTION AND MAINTENANCE Replace the Oil Filter NOTE: 2.4 L engine • When it is difficult to remove the oil filter, we recommend you take your vehicle to EXAMPLE your SUZUKI dealer for oil filter replace- ment. • For 3.2 L engine, since special proce- dures are required, we recommend you take your vehicle to your SUZUKI dealer for oil filter replacement. Refill with Oil and Check for Leaks 1) Pour oil through the filler hole and install the filler cap. For the approximate capacity of the oil, 54G093 refer to the “Capacities” item in the (1) Oil filter “SPECIFICATIONS” section. 78K055 (2) 3/4 turn 2) Start the engine and look carefully for 1) Using an oil filter wrench, turn the oil fil- leaks at the oil filter and drain plug. Run ter counterclockwise and remove it. 5) Tighten the filter 3/4 turn from the pointthe engine at various speeds for at least 2) Using a clean rag, wipe off the mount-of contact with the mounting surface (or 5 minutes. to the specified torque) using an oil filter3) Stop the engine and wait about 5 min- ing surface on the engine where the utes. Check the oil level again and add new filter will be seated. wrench. oil if necessary. Check for leaks again. 3) Smear a little engine oil around the rub-6) Reinstall the engine under cover. ber gasket of the new oil filter. CAUTION 4) Screw on the new filter by hand until theTightening torque specification filter gasket contacts the mounting sur- 14 Nm (10.1 lb-ft, 1.4 kg-m) When replacing the oil filter, it is rec- face. ommended that you use a genuine CAUTION SUZUKI replacement filter. If you use CAUTION an after-market filter, make sure it is To tighten the oil filter properly, it is of equivalent quality and carefully fol- To prevent oil leakage, make sure important to accurately identify the low the manufacturer’s instructions that the oil filter tight, isbut do not and precautions. position at which the filter gasket first contacts the mounting surface. overtighten it. 7-12 79K21-03E

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders