owners manual Seat Arona

all ratings: 0 average rating: 5

Care and maintenance Steel wheel rims Alloy wheels require regular attention to pre- WARNING a serve their appearance. If road salt and brake at Do not apply underseal or anti-corrosion d – Clean steel wheel rims regularly using adust are not often removed, the aluminium al coatings to the exhaust pipes, catalytic con- separate sponge. finish will be impaired. verter or the heat shields on the exhaust sys- hnic Always use an acid-free detergent for alloytem. The heat of the exhaust system or the ec Use an industrial cleaner to remove brake T engine could cause them to ignite. Risk of wheel rims. dust. Any damage to the paint on steel wheel fire. rims should be repaired before starting to Car polish or other abrasive agents should rust. not be used for maintaining the rims. If the e ic protective coating is damaged, e.g. by flying WARNING Cleaning engine compartment stones, the damaged area should be re- Adv ● Never wash tyres with a cylindrical jet. Evenpaired immediately. Take special care when cleaning the engine at large spraying distances and short clean- compartment. ing times, damage can occur to the tyres.WARNING This may cause an accident. Observe the safety warnings ››› in Steel Anti-corrosion treatment ● Water, ice and salt on the brake system can wheel rims on page 261. ation reduce braking effectiveness. Risk of acci- The engine compartment and the surface of dent. Directly after washing, avoid sudden the power unit are given anti-corrosion treat- Oper and sharp braking. “Dry” the brakes by brak- ment at the factory. Vehicle underbody protection ing several times ››› page 174, Braking ca- Good corrosion protection is particularly im- pacity and braking distance. s The vehicle underbody is coated to protect itportant in winter when the vehicle is fre- ie from chemical and mechanical damage.quently driven on salted roads. To prevent enc g the salt corroding the vehicle, the entire en- The protective coating can be damaged when Alloy wheel rims gine compartment should be thoroughly driving. We recommend that you check the Emer cleaned before and after winter. Every two weeks protective coating under the body and on the running gear, and retouch it if necessary, be-Technical Services have the proper products – Wash salt and brake dust from alloy fore and after the winter season.for cleaning and preservation as well as the wheels. necessary workshop equipment. For this rea- ety We recommend that you go to your Technical – Use an acid free detergent to clean the son, we recommend having this work per- Service to carry out repair work and addition- Saf wheel rims. formed by them. al anti-corrosion work. The anti-corrosion protection is usually re- Every 3 months moved if the engine compartment is cleaned – Apply a hard wax compound to the wheels. with grease removing solutions, or if you» 261

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders