owners manual Jeep Commander

owners manual Jeep Commander - year of production: 2006, 2007, 2008, 2009, 2010 - Jeep Commander owners manual XK XH EN

Document: pdf (7.46 MB) 460 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Commander, year of production 2006 - 2010:

STARTINGANDOPERATING 259 “4WD LOW” indicator light in the instrument cluster3 mph (0 to 5 km/h). If the vehicle is moving faster will flash and go out when the shift is complete. Releasethan 3 mph (5 km/h), the transfer case will not allow the T-handle. the shift. NOTE: NEUTRALShift Procedure • If shift conditions/interlocks are not met, or a transfer1. Key ON, engine off. case motor temperature protection condition exists, a “CHECK SHIFT PROCEDURES” message will flash 2. Vehicle stopped, with foot on brake. fromtheElectronicVehicleInformationCenter(EVIC).3. Place the transmission into NEUTRAL. Refer to “Electronic Vehicle Information Center 5 (EVIC)” in Section 4 of this manual. 4. Hold down the NEUTRAL “pin” switch (with a pen, • Shifting into or out of 4WD LOW is possible with theetc.) for four seconds until the LED light by the switch vehicle completely stopped; however, difficulty maystarts to blink indicating shift in progress. The light will occur due to the mating clutch teeth not being prop-stop blinking (stay on solid) when the NEUTRAL shift is erly aligned. Several attempts may be required forcomplete.A“4WDSYSTEMINNEUTRAL”messagewill clutch teeth alignment and shift completion to occur.display on the Electronic Vehicle Information Center The preferred method is with the vehicle rolling 0 to(EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Commander
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.