owners manual Jeep Commander

owners manual Jeep Commander - year of production: 2006, 2007, 2008, 2009, 2010 - Jeep Commander owners manual XK XH EN

Document: pdf (7.46 MB) 460 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Commander, year of production 2006 - 2010:

258 STARTINGANDOPERATING additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). Shifting Procedures 4WDHIto4WDLOW With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into NEUTRAL, and raise the transfer case T-handle. The “4WD LOW” indicator light in the instrument cluster will begin to flash and remain on solid when the shift is complete. Release the T-handle. NOTE: If shift conditions/interlocks are not met, or aShifter T-Handle transfer case motor temperature protection condition4WDLOWto4WDHI exists, a “CHECK SHIFT PROCEDURES” message will With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), flash from the Electronic Vehicle Information Centerkey ON or engine running, shift the transmission into (EVIC). Refer to “Electronic Vehicle Information CenterNEUTRAL, and raise the transfer case T-handle. The (EVIC)” in Section 4 of this manual.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Commander
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.