owners manual Mercedes ML

all ratings: 0 average rating: 5

Towing at railer 255 utilize any of the added maximum rear axle Installing the ball coupling load when towing a trailer, the vehicle/trailer G WARNING combination may not exceed a maximum speed of 60 mph (100 km/h) for reasons If the ball coupling is not installed and secured concerning the operating permit .T his also correctly it can become detached while the applies in countries in which the permissible vehicle is in motion and fall onto the road. maximum speed for vehicle/trailer There is a risk of accident and injury. combinations is above 60 mph (100 km/h). Always install and secure the ball coupling as When towing a trailer, your vehicle's handling described. Before every journey, ensure that ng parki d characteristics will be different in comparison the ball coupling is secured with the bolt and with when driving without at railer. the corresponding spring cotter. On long and steep downhill gradients, you G WARNING must select shift range 1, 2 or 3 in good time. If the ball coupling is not installed correctly or i an This also applies if you have activated ng ivi Dr not secured with the bolt provided and the cruise control or DISTRONIC PLUS. corresponding spring cotter, the trailer may This will use the braking effect of the engine, come loose. There is a risk of an accident. so that less braking will be required to Always install and secure the ball coupling as maintai nt he speed, This relieves the load on described. Before every journey, ensure that the brake system and prevents the brakes the ball coupling is secured with the bolt and from overheating and wearing too quickly. If the corresponding spring cotter. you need additional braking, depress the brake pedal repeatedly rather than G WARNING continuously. If the ball coupling is not installed and secured correctly the trailer may come loose. There is Driving tips a risk of an accident. If the trailer swings from side to side: Install and secure the ball coupling as described in the ball coupling installation X Do not accelerate. instructions. Make sure that the ball coupling X Do not counter-steer. is installed and secured correctly before every X Brake if necessary. journey. R Maintain a greater distance from the vehicle in front than when driving without a trailer. R Avoid braking abruptly. If possible, brake gently at first to allow the trailer to run on. Then, increase the braking force rapidly. R The values given for gradient-climbing capabilities from a standstill refer to sea level. When driving in mountainous areas, note that the power output of the engine and, consequently, the vehicle's gradient- climbing capability, decreases with Cover cap increasing altitude. Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders