owners manual Hyundai i10

owners manual Hyundai i10 - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013 - Hyundai i10 I 1 owners manual EN

Document: pdf (38.84 MB) 354 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai i10, year of production 2007 - 2013:

What to do in an emergency Distributing the sealantProducing the tire inflation pres-- To reduce the inflation pres- sure sure: Press the button 8 on the Immediately drive approximately 3 1) After driving approximately 3 kmcompressor. km (2 miles) to evenly distribute the sealant in the tire. (2 miles), stop at a suitable loca- tion. CAUTION CAUTION 2) Connect connection hose 9 of theIf the inflation pressure is not compressor directly to the tire Do not exceed a speed of 60 maintained, drive the vehicle a valve. second time,refer to Distributing km/h (35 mph). If possible, do not fall below a speed of 20 the sealant. Then repeat steps 1 3) Connect between compressor km/h (12 mph). and the vehicle power outlet usingto 4. While driving, if you experiencethe cable and connectors.Use of the TireMobilityKit may any unusual vibration, ride dis- be ineffectual for tire damage 4) Adjust the tire inflation pressure to turbance or noise, reduce your 230 kPa (33 psi).With the ignition larger than approximately 4 mm (0.16 in). speed and drive with caution switched on, proceed as follows. until you can safely pull off of Please contact the nearest the side of the road. - To increase the inflation pres- HYUNDAI A/S center, or a work- sure: Switch on the compressor, Call for road side service or tow- shop that works according to position I. To check the current ing. HYUNDAI repair procedures inflation pressure setting, briefly switch off the compressor.with correspondingly trained personnel if the tire cannot be WARNING made roadworthy with the TireMobilityKit. Do not let the compressor run for more than 10 minutes, otherwise the device will overheat and mayWARNING be damaged. The tire inflation pressure must be at least 230 kPa (33 psi). If it is not, do not continue driving. Call for road side service or towing. 6 18

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai i10
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.