Subaru Outback Legacy III 3 owners manual page 253

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2004 - 2009:

7-12 Starting and operating &Entering the vehicle while ittransmitter within a few seconds immedi-! Todisengage the service mode is running via remote startately following remote engine start shut-Turntheignitionswitchto“ONthe” down. position, depress and hold the brake 1. Unlock the vehicle doors using the pedal, then press and release the “ ” keyless entry system. If the vehicle’s&Pre-heating or pre-coolingbutton on the remote control transmitter doors are unlocked manually using thethe interior of the vehiclethree times. The system will pause for 1 key, the vehicle’s alarm system will trigger second and flash the parking lights 1 time and the remote engine start system willBefore exiting the vehicle, set the tem-indicating that the system has exited turn off. Inserting the key into the ignitionperature controls to the desired settingservice mode. switch and turning it to the “ON” position orand operation. After the system starts the pressing the unlock button “” on thevehicle, the heater or air-conditioning willNOTE remote keyless entry transmitter will dis-activate and heat or cool the interior toWhentakingyourvehicleinforservice, arm the alarm system. Refer to the “Alarmyour setting.it is recommended that you inform the system” section in chapter 2. service personnel that your vehicle is 2. Enter the vehicle. Do not press the&Service modeequipped with a remote control start brake pedal. In service mode, the remote start functionsystem. 3. Insert the key into the ignition switchis temporarily disabled to prevent the andturntothe“ON”position. If the ignitionsystem from unexpectedly starting the&Remotetransmitter program- engine while being serviced. switch is accidentally turned to the ming and programmable fea- “START” position, the system’s “starter! Toengage the service modeture option anti-grind” feature will prevent the starter from re-cranking. Turn the ignition switch to the“ON”New transmitters can be programmed to 4. Press the brake pedal. The remoteposition, depress and hold the brake pedalthe engine starter system in the event that starter disengages, the vehicle’s powerthen, press and release the “” button onremote transmitters are lost, stolen or window features are re-enabled and thethe remote control transmitter three times.damaged.Theremoteenginestartsystem vehicle will operate normally.The system will pause for 1 second andalso has one programmable feature that then flash the parking lights and honk thecan be adjusted for user preference. &Entering the vehicle follow-horn three times indicating that the systemThe remote engine starter system can be ing remote engine start shut-is in service mode. When attempting toprogrammed to either make an audible activate the remote start system while inhorn chirp upon remote start activation or down service mode, the parking lights will flashnot. Remote transmitter programming and Analarmtriggermayoccurifthevehicleisand the horn will honk two times and willfeature programming can be adjusted opened by the remote keyless entry not start. using the following procedure.

owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2004, 2005, 2006, 2007, 2008, 2009 - Subaru Outback Legacy III 3 owners manual EN