owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating7-9 Starting the engine Ifthe engine does not start, try the6. Confirm that all warning and indicator following. lights have gone off after the engine has (1) Turn the ignition switch to thestarted. The fuel injection system auto- CAUTION “LOCK” position and wait for at leastmatically lowers the idle speed as the 10 seconds. After checking that theengine warms up. Do not operate the starter motorparking brake is firmly set, turn the continuously for more than 10 sec-ignition switch to the “START” position&Automatic transmission ve- onds. If the engine fails to start afterwhile depressing the accelerator pedalhicle operating the starter for 5 to 10slightly (approximately a quarter of the seconds, wait for 10 seconds orfull stroke). Release the accelerator CAUTION more before trying again. pedal as soon as the engine starts. (2) If this fails to start the engine, turnIf you restart the engine while the &Manualtransmission vehicle the ignition switch back to the “LOCK”vehicle is moving, shift the selector position and wait for at least 10lever into the “N” position. Do not 1. Apply the parking brake. seconds. Then fully depress the accel-attempt to place the selector lever of 2. Turn off unnecessary lights and ac-erator pedal and turn the ignitiona moving vehicle into the “P” posi- cessories. switch to the “START” position. If thetion. 3. Press the clutch pedal to the floor andengine starts, quickly release the shift the shift lever into neutral.accelerator pedal. 1. Apply the parking brake. Hold the clutch pedal to the floor while(3) If this fails to start the engine, turn2. Turn off unnecessary lights and ac- starting the engine. The starter motor willthe ignition switch again to the “LOCK”cessories. only operate when the clutch pedal isposition. After waiting for 10 seconds3. Shift the selector lever to the “P” or “N” pressed fully to the floor. or longer, turn the ignition switch to theposition (preferably“P” position). The 4. Turn the ignition switch to the “ON”“START” position without depressingstarter will only operate when the select position and check the operation of thethe accelerator pedal.lever is at the “P” or “N” position. warning and indicator lights. Refer to the(4) If the engine still refuses to start,4. Turn the ignition switch to the “ON” “Warning and indicator lights” sectioncontact your nearest SUBARU dealerposition and check the operation of the (chapter 3). for assistance. warning and indicator lights. Refer to the 5. Turn the ignition switch to the “START” “Warning and indicator ligh”tssection position without depressing the accelera- (chapter 3). tor pedal. Release the key immediately 5. Turn the ignition switch to the “START” after the engine has started. position without depressing the accelera- – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders