owners manual Seat Alhambra

all ratings: 0 average rating: 5

Advice Putting on the spare wheel ● After changing the wheel Never raise the vehicle if it is tilting to one side or the engine is running. Check the direction of rotation of the tyre ●Clean the wheel brace, if necessary, and ● Never start the engine when the vehicle is››› page 232. put it away in the boot ››› page 244. raised. The vehicle may come loose from the ●Fit the wheel. jack due to the engine vibrations. ●Have the tightening torque of the wheel ●Screw on the anti-theft locking bolt withbolts checked as soon as possible with a tor- the adapter in position ››› Fig. 186 2 or 3que wrench ››› page 248. clockwise and tighten gently. Changing a wheel Note ●Replace the other wheel bolts and tighten slightly using the hexagonal socket on theIf the vehicle is fitted with a tyre monitoring system, this should be “reprogrammed” if end of the wheel brace. necessary whenever a tyre is changed ●Lower the car with the jack. ››› page 179. ●Tighten all of the wheel bolts clockwise ››› . Tighten the bolts in diagonal pairs (not in a circle). Tyre repair ●Put the caps, trim or full hubcap back on ››› page 247. TMS (Tyre Mobility System)* WARNING Fig. 189 Changing a wheel: loosen wheel The Anti-puncture kit* (Tyre Mobility System) bolts with the socket at the end of the wheelIf the wheel bolts are not treated suitably or will reliably seal punctures caused by the brace not tightened to the correct torque then this penetration of a foreign body of up to about could lead to loss of vehicle control and to a 4 mm in diameter. Do not remove foreign ob- Removing the wheel serious accident. jects, e.g. screws or nails, from the tyre. ● All the wheel bolts and hub threads should ●Loosen the wheel bolts ››› page 247. be clean and free of oil and grease. The wheelOnce the sealant is in the tyre, make sure to ●Jacking up the vehicle ››› page 249. bolts should be easily tightened to the cor-check the pressure after 10 minutes driving. ●Using the hexagonal socket in the wheelrect torque. If the vehicle has more than one damaged brace ››› Fig. 189, unscrew the slackened ● The hexagonal socket in the wheel brace tyre, seek professional assistance. The tyre wheel bolts and place them on a clean sur- should be used for turning wheel bolts only. mobility system is designed for filling one face. Do not use it to loosen or tighten the wheel tyre. bolts. ●Take off the wheel. Only use the tyre mobility system if the vehi- cle is properly parked, you know how to do it 250

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders