owners manual Nissan Micra

all ratings: 0 average rating: 5

Black plate (249,1) Jacking up vehicle WARNING: GUID-AD0EA628-66DE-4106-9301-941D266A20DE . Neverusewheelnutswhicharenotprovided with your vehicle. Incorrect wheel nuts or improperly tightened wheel nuts may cause the wheel to become loose or come off. This could cause an accident. . Never use oil or grease on the wheel studs or nuts. This may cause the wheel nuts to become loose. . Thetemporary-use spare tire is designed for SCE0504 emergency use only. 1. Clean any mud or dirt from the surface between 1. Place the jack directly under the jack-up point asRemoving tire the wheel and hub. illustrated so that the top of the jack contacts the GUID-FFA0175C-16AD-4679-BFC7-EDC03785107C 1. Remove the wheel nuts. 2. Carefully put the spare tire on and tighten the vehicle at the jack-up point. 2. Remove the damaged tire. wheel nuts with your fingers. Check that all the The jack should be placed on firm level wheel nuts contact the wheel surface horizontally. ground. CAUTION: 2. Align the jack head between the two notches 3. Tighten the wheel nuts alternately and evenly, Thetire is heavy. Be sure that your feet are clear more than 2 times in the sequence illustrated (*1 located at the jack-up point of either the front orfrom the tire and use gloves as necessary to - *4 ), with the wheel nut wrench, until they are the rear section. avoid injury. tight. 3. Fit the groove of the jack head between the 4. Lower the vehicle slowly until the tire touches the notches as shown. Installing spare tire ground. 4. Loosen each wheel nut, counterclockwise, one or GUID-A275BDB2-CC15-43EA-ADD5-F04791973386 two turns with the wheel nut wrench. 5. Tighten the wheel nuts securely, with the wheel nut wrench, in the sequence illustrated. Donotremovethewheelnutsuntilthetireis 6. Lower the vehicle completely. off the ground. Tighten the wheel nuts to the specified torque 5. Carefully raise the vehicle until the clearance with a torque wrench as soon as possible. between the tire and ground is achieved. Wheel nut tightening torque: 6. To lift the vehicle, securely hold the jack lever and 108 N·m (11 kg-m, 80 ft-lb) rod with both hands and turn the jack lever. The wheel nuts must be kept tightened to specification at all times. It is recommended SCE0576 that the wheel nuts be tightened to specification at each lubrication interval. In case of emergency 6-5 Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders