owners manual Skoda Kodiaq

all ratings: 0 average rating: 5

Start control Set/change desired speed Read and observe on page ėęĘ first. Read and observe on page ėęĘ first. Basic requirements for start of control 0he desired speed can be set or changed using the control lever » Fig. Ęĕě on page ėęĚ.  0he ACC is activated.  On vehicles with manual transmission, the second gear or a higher gear is Setting/changing the speed by increments of Ėĕ km/h at a time () - re- selected and the current speed is greater than ėĚ km/h. quirements  On vehicles with automatic transmission, the selector lever is in the D/S  0he ACC is activated. position or in the 0iptronic position. Increasing/reducing the speed by increments of Ė km/h at a time (/- Start control requirements ›Press the button  » Fig. Ęĕě on page ėęĚ the button.  0he ACC is activated. ›or: Set the lever to the sprung position  » Fig. Ęĕě on page ėęĚ .  2ehicle control takes place. 0he ACC takes the current driving speed and performs the control, the warning Changing the speed by adopting the current speed () - requirements light  illuminates in the instrument cluster.  0he ACC is activated. If the control is started by moving the lever to the position  and should  0he vehicle is moving at a speed other than that which is stored. the speed be stored already, the ACC adopts this speed and carries out the control. Note ■ If during control the speed is increased by pressing the accelerator, control is Note temporarily stopped. 1pon releasing the accelerator, control is automatically If control is started at a speed of less than Ęĕ km/h on vehicles with an auto- resumed. matic transmission, the speed of Ęĕ km/h is stored. 0he speed increases auto- ■ If during control the speed is reduced by applying the brake, control is stop- matically to Ęĕ km/h or is regulated with respect to the speed of the vehicle ped. Control needs to be restarted in order to resume » page ėęě. ahead. ■ If the vehicle is controlled by a lower speed than the stored speed, then  the current speed is stored by pressing the button again  and the speed is Stop/resume control reduced in increments of Ė km/h. Read and observe on page ėęĘ first. Set the clearance level Stop control Read and observe on page ėęĘ first. ›Set the lever into the sprung position  » Fig. Ęĕě on page ėęĚ . ›or: apply the brake pedal. 0he proximity to the vehicle ahead can be set with the lever » Fig. Ęĕě on page ėęĚ or in Infotainment » page ėęę, Settings in Infotainment. Control stops, the speed remains stored. Setting by means of the lever Resume control ›Set the switch  to the spring-tensioned position  or  » Fig. Ęĕě on ›Start control » page ėęě, Start control. page ėęĚ. Note 0he display of the instrument cluster shows line ė » Fig. Ęĕę on page ėęę, Control is also stopped when the clutch pedal is held down for longer than Ęĕ  which indicates the proximity. s or the 0CS is deactivated. ėęě Driving

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders