owners manual Skoda Kodiaq

all ratings: 0 average rating: 5

ACC displays » Fig. Ęĕę Decelerate to a standstill If a vehicle ahead decelerates to a standstill, the ACC will also decelerate your Ė2ehicle detected (control active) vehicle to a standstill. ėLine that marks the shift in distance when setting » page ėęě, Set the clearance level Starting to drive again after a holding period ĘSet distance to the vehicle ahead As soon as the vehicle ahead starts moving again after a holding period, your vehicle will also move and the speed will continue to be regulated. ę 2ehicle detected (control deactivated) If the vehicle in front starts moving again after a long break, press the acceler- ACC status displays » Fig. ĘĕĚ ator pedal or set the lever to position  in order to continue control  Regulation is inactive (in the colour display the digits of speed limits is » page ėęĚ. shown in grey).  Regulation active - no vehicle detected (in the colour display the digits of Operation overview the speed limits are highlighted).  Regulation deactivated - no speed stored.  Regulation active - vehicle detected (in the colour display the digits of the speed limits are highlighted). Note to reduce speed If the delay of the ACC is insufficient in relation to the vehicle in front, the warning light  lights up in the instrument cluster and the display shows a message to engage the brake pedal. Regulation according to the vehicle in the adjacent lane During regulation your vehicle may be regulated according to the vehicle in the adjacent lane. Fig. Ęĕě Operating lever 0his could occur at speeds above about ĝĕ km/h when your vehicle is moving Read and observe on page ėęĘ first. faster than the vehicle in the adjacent lane on the driver's side. 0he display shows the detected vehicle is in the adjacent lane. Overview of ACC functions operated with the lever » Fig. Ęĕě Ė  Activate ACC (regulation deactivated) Note ė Start control (resume) / increase speed by Ė km/h at a time Some ACC notifications in the display of the instrument cluster may be hidden by notifications for other functions. An ACC notification automatically appears(sprung position) for a brief moment when there is a change in status of the ACC. Ę Interrupt control (spring-tensioned position) ę  Deactivate ACC Automatic stopping and starting Ě  Increase speed by Ėĕ km/h at a time Read and observe on page ėęĘ first. ě  Decrease speed by Ėĕ km/h at a time A    Set proximity level 2ehicles with an automatic transmission can decelerate to a standstill and B  Start control / reduce speed in increments of Ė km/h start moving again using the ACC. If the lever is set from the position  directly into the sprung position  the current speed is stored and the control process is started. Assist systems ėęĚ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders