owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 246 d2ureepe, Version: 2.11.8.1 246 Tires and wheels Aspect ratio Tire size designation, load and speed rating Aspect ratio ; is the dimensional relationship between tire section height and section width and is expressed in percentage. The aspect ratio is arrived at by dividing section height by section width. Tire code Tire code = indicates the tire construction type. The “R” stands for radial tire type. Letter “D” means diagonal or bias ply construction; letter “B” means belted-bias ply construction. At the tire manufacturer’s option, any tire :Tire width with a speed capability above 149 mph (240 km/h) can include a “ZR” in the size ;Aspect ratio in % Operation designation (for example: 245/40 ZR 18). For =Radial tire code additional information, see “Tire speed ?Rim diameter rating” (Y page 247). ALoad index Rim diameter BSpeed symbol Rim diameter ? is the diameter of the bead iFor illustration purposes only. Actual data seat, not the diameter of the rim edge. The on tires are specific to each vehicle andrim diameter is indicated in inches (in). may vary from data shown in above Load index illustration. GWarning! General: Depending on the design standards The tire load rating must always be at least used, the tire size molded into the sidewall half of the GAWR of your vehicle. Otherwise, may have no letter or a letter preceding the tire failure may be the result which may cause tire size designation. an accident and/or serious injury to you or No letter preceding the size designation (as others. illustrated above): Passenger car tire based Always replace rims and tires with the same on European design standards. designation, manufacturer and type as shown Letter “P” preceding the size designation: on the original part. Passenger car tire based on U.S. design standards. GWarning! Letter “LT” preceding the size designation: Do not overload the tires by exceeding the Light Truck tire based on U.S. design specified load limit as indicated on the Tire standards. and Loading Information placard on the Letter “T” preceding the size designation: driver’s door B-pillar. Overloading the tires Temporary spare tires which are high can overheat them, possibly causing a pressure compact spares designed for blowout. Overloading the tires can also result temporary emergency use only. in handling or steering problems, or brake failure. Tire width Tire width : indicates the nominal tire width Load index A is a numerical code associated in millimeters. with the maximum load a tire can support.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders