owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 236 d2ureepe, Version: 2.11.8.1 236 Tires and wheels XUsing the Tire and Loading Information placard on the driver’s door B-pillar (Y page 237) or the supplemental tire inflation pressure information on the inside of the fuel filler flap, make sure the tire inflation pressure of all four tires is correct. XSwitch on the ignition. Example illustration XPress button = or ; on the The respective tire is indicated by a red multifunction steering wheel to select the rectangle. Serv. menu. XPress button 9 or : on the Restarting Advanced TPMS multifunction steering wheel to select GWarning! Tire Pressure. It is the driver’s responsibility to set the tire XPress button a. inflation pressure to the recommended cold Operation The current inflation pressure for each tire tire inflation pressure. Underinflated tires appears in the multifunction display or the affect the ability to steer or brake the vehicle. following message appears in the You might lose control over the vehicle. multifunction display: When you restart the TPMS, the system setsTire pressures new reference values for each tire.will be displayed after driving The TPMS must be restarted when you have a few minutes adjusted the tire inflation pressure to a new level (e.g. because of different load or drivingXPress button :. conditions). The TPMS is then recalibrated toThe following message appears in the the current tire inflation pressures.multifunction display: Use Current iCanada only: Pressures As New The TPMS usually recognizes tire pressure Reference Values adjustments and sets new reference values Press 'OK' to Confirm automatically. You can, however, restart XPress button a. the TPMS manually as described. The following message appears in the Restart the TPMS after adjusting the tire multifunction display: inflation pressure to the inflation pressure Tire Press. Monitor recommended for the vehicle operating Restarted condition. Tire inflation pressure should only After driving a few minutes the system be adjusted on cold tires. Observe the verifies that the current tire inflation recommended tire inflation pressure on the pressures are within the system’s specified Tire and Loading Information placard on the range. Afterwards the current tire inflation driver’s door B-pillar. Some vehicles may have pressures are accepted as reference values supplemental tire inflation pressure and then monitored. information for driving at high speeds or for XIf you wish to cancel: Press button %. vehicle loads less than the maximum loaded vehicle condition. If such information isor provided, it can be found on the inside of the XPress button 9 to exit the menu screen. fuel filler flap. iWhen the wheel positions have been changed, the inflation pressure of a tire

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders