owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

DRIVE-CONTROL CbMPONENTS - ABS 3-27 ANTI-LOCK BRAKE SYSTEM (ABS) N73ZMOOAA The major features of the ABS are described below. LThe ABS used in the 1995 Eclipse is similar to the previous one. l When a failure occurs in the system, you can identify the faulty area in the diagnostic test The ABS is a brake system which detects skids mode. The failure data stored in memory is that could be caused by abrupt brake application not erased even if the ignition switch is placed or by brake application on a slippery road surface, in the OFF position. Use of the scan tool enables and adequately controls the brake fluid pressure you to read the diagnostic trouble code or clear to prevent skids caused by locked wheels. It assures directional stability and steerability during brakeap- the memory. In addition, you can read the sensor data (data list) stored in the electronic control plication and reduces the brake stopping distance. The basic principles and effects of the ABS are unit (ECU) and test the hydraulic unit (HU) and other actuators. (Refer to P. 3-43.) the same as those of the conventional system. 14X0269 Part name No. Function Wheel speed sensor 1 Sends an AC signal with a frequency proportional to the ro- Sensor tating speed of the individual wheel to the ABS-ECU. Stop light switch 2 Sends a signal to the ABS-ECU indicating whether the brake pedal is pressed or not. Controls braking pressure for each wheel depending on the Hydraulic unit (HU) 3 signal from the ABS-ECU. Includes built-in plunger valve Motor relay 4 Closes contact in response to a signal from the ABS-ECU to allow the power to be supplied to the motor in the HU. Actuator 5 Is turned ON by the ABS-ECU signal and supplies power to Valve relay the solenoid valve in HU. ABS warning light 6 Is in the combination meter and lights up when there is trouble in ABS. i Data link connector 7 Outputs diagnostic trouble codes. Electronic control unit (ECU) 8 Controls the actuators such as HU according to the signals from the individual sensors.

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.