instrukcja obsługi Suzuki SX4 S Cross Suzuki SX4 S Cross owners manual page 241

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

OTHER CONTROLS AND EQUIPMENT Head Air conditioning switch (5) System Operating Instructions cooled/Feet warmed heating To turn on the air conditioning system, set Select "BI-LEVEL" and "FRESH AIR", the the blower speed selector to a position Natural ventilation temperature selector to the desired tem- other than "OFF" and push in the "AlC" Select "VENTILATION" and "FRESH AIR", perature position, and the blower speed switch. With this "AlC" switch operation, a the temperature selector to the desired selector to the desired blower speed posi- tion. Unless the temperature selector indicator is in light will come on when the air temperature position, and the blower the fully COLD position or fully HOT posi- conditioning system is on. To turn off the speed selector to "OFF". Fresh air will flow tion, the air that comes out of the center air conditioning system, push the "AlC" through the vehicle during driving. and side outlets will be cooler than the air switch again. that comes out of the floor outlets. Forced During operation of the air conditioner, you ventilation may notice slight changes in engine The control settings are the same as for Normal cooling speed. These changes are normal, the natural ventilation except you set the Set the air flow selector to "VENTILATION", system is designed so that the compressor blower speed selector to a position other the temperature selector to the desired tem- turns than "OFF". perature position and the blower speed on or off to maintain the desired tem- selector to the desired blower speed posi- perature. Normal heating (using outside air) tion, and turn on the "AlC" switch. Setting Less operation of the compressor results Select "HEAT" and "FRESH AIR", the tem-the blower speed selector to a higher in better fuel economy. perature selector to the desired tempera-blower speed position increases cooling ture position and the blower speed selector efficiency. to the desired blower speed position. Set- ting the blower speed selector to a higher You can switch the air intake selector to blower speed position increases heating either "FRESH AIR" or "RECIRCULATED efficiency. AIR" as you desire. Choosing "RECIRCU- Quick heating (using recirculated air) LATED AIR" increases cooling efficiency. The control settings are the same as for Quick cooling (using recirculated air) normal heating except you select "RECIR-The control settings are the same as for CULATED AIR". If you use this heating normal cooling except you select "RECIR- method for an extended period of time, the CULATED AIR" and the highest blower air in the vehicle can become contami-speed. nated and the windows can become misty. Therefore, use this method only for quick heating and change to the normal heating method as soon as possible. 5-30