instrukcja obsługi Suzuki SX4 S Cross Suzuki SX4 S Cross owners manual page 238

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

OTHER CONTROLS AND EQUIPMENT Air intake selector (4) System Operating Instructions Head cooledlFeet warmed heating Select "BI-LEVEL" and "FRESH AIR", the temperature Natural ventilation selector to the desired tem- Select "VENTILATION" and "FRESH AIR", perature position, and the blower speed the temperature selector to the desired selector to the desired blower speed posi- temperature position, and the blower tion. Unless the temperature selector is in (f) (g) speed selector to "OFF". Fresh air will flow the fully COLD position or fully HOT posi- through the vehicle during driving. tion, the air that comes out of the center 61MMOA020 and side outlets will be cooler than the air This selector is used to select the following Forced ventilation that comes out of the floor outlets. modes. The control settings are the same as for Defrosting/Feet warmed heating natural ventilation except you set the Select "HEAT & DEFROST" and "FRESH Fresh Air (f) blower speed selector to a position other AIR", the temperature selector to the When this mode is selected, the indicator than "OFF". desired temperature position, and the light will go off and outside air is used. Normal heating (using outside air) blower speed selector to HIGH. When the Recirculated Air (g) Select "HEAT" and "FRESH AIR", the tem- windshield has become clear, set the When this mode is selected, the indicator perature selector to the desired tempera-blower speed selector to the desired light will come on, outside air is shut out ture position and the blower speed selector blower speed position. and inside air is recirculated. This mode is to the desired blower speed position. Set-Defrosting suitable when driving through dusty or pol-ting the blower speed selector to a higher Select "DEFROST" and "FRESH AIR", the luted air such as in a tunnel, or when blower speed position increases heating temperature selector to the desired tem- attempting to quickly cool down the inte-efficiency. perature position (higher temperature pro- rior. Quick heating (using recirculated air) vides more efficient defrosting), and the "FRESH AIR" and "RECIRCULATED AIR" The control settings are the same as for blower speed selector to HIGH. When the are switched alternately each time the air normal heating except you select "RECIR-windshield has become clear, set the intake selector is pushed. CULATED AIR". If you use this heating blower speed selector to the desired method for an extended period of time, the blower speed position. NOTE: air in the vehicle can become contami- If you select "RECIRCULATED AIR" for an nated and the windows can become misty. extended period of time, the air in the vehi-Therefore, use this method only for quick cle can become contaminated. Therefore, heating and change to the normal heating you should occasionally select "FRESH method as soon as possible. AIR". 5-27