owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US2010-05-20T09:17:30+02:00 - Seite 233 hereepe Version: 3.0.3.6 Features 233 iThe distance between garage door of the garage door. People could otherwise be remote control A and the integrated injured by the movement of the door. garage door opener depends on the system of the garage door drive. You might require several attempts. You should test every position for at least 20 seconds before trying another position. XKeep transmitter button B on garage door remote control A pressed until indicator lamp : starts to flash rapidly. The programming has been successful if indicator lamp : flashes rapidly. XRelease transmitter buttons ;, = or ? Remote control in the rear-view mirror on the integrated remote control or Garage door remote control A is not part oftransmitter button on the garage door the garage door opener. remote control B. iTo achieve the best result, insert new If indicator lamp : goes out after batteries in garage door remote control approximately 20 seconds and has not Loading, stowing and features A of your garage door drive before flashed rapidly: programming. XRelease transmitter buttons ;, = or ? XErase the memory of the integrated remote on the integrated remote control or control (Y page 235) before programming transmitter button on the garage door it for the first time. remote control B. XTurn the SmartKey to position 2 in the XRepeat the procedure for the other ignition lock. transmitter buttons. When doing so, vary XPress and hold one of transmitterthe distance between the garage door's buttons ; to ? on the integrated remoteremote control and the transmitter buttons control. in the rear-view mirror. After a short time, indicator lamp : will iIf the garage door system works with a start flashing. It flashes about once per rolling code, you must synchronize the second. remote control integrated into the rear- iIndicator lamp : flashes immediately view mirror with the garage door system the first time that the transmitter button is receiver after programming. programmed. If this transmitter button has You will find further information in the already been programmed, indicator garage door opening system's operating lamp : will only start flashing at a rate of instructions, e.g. the sections on once per second after 20 seconds have "Synchronizing the transmitter" or elapsed. "Registering a new transmitter". You can XKeep the transmitter button depressed.also call the hotline mentioned above. XPoint transmitter button B of garage door Notes on programming the remote remote control A towards the transmitter control buttons on the rear-view mirror from a Canadian radio frequency laws require distance of 2 to 12 inches (5 to 20 cm). transmitter signals to "time-out" (or quit) after several seconds of transmission. This may Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders