Nissan Micra March K13 owners manual page 229

text version of content this owner's manual page from owners manual to the vehicle Nissan Micra, year of production 2010:

Black plate (228,1) a malfunction. Restart the engine after. You may feel a pulsation in the brake pedal andVEHICLE DYNAMIC CONTROL (VDC) OFF driving onto a stable surface. hear a noise or vibration from under the hood. ThisSWITCH is normal and indicates that the VDC system is GUID-941C52A4-286C-4DB0-AFFC-1563619EE044 . If wheels or tires other than the NISSAN working properly. recommended ones are used, the VDC system may not operate properly and the . Adjust your speed and driving to the road VDCwarning light may illuminate. conditions. . TheVDCsystemisnotasubstituteforwinter If a malfunction occurs in the system, the VDC warning tires or tire chains on a snow covered road. light illuminates in the instrument panel. The VDC system automatically turns off. The Vehicle Dynamic Control (VDC) system uses The VDC OFF switch is used to turn off the VDC various sensors to monitor driver inputs and vehiclesystem. The VDC off indicator lightilluminates to motion. Under certain driving conditions, the VDC indicate the VDC system is off. When the VDC OFF system helps to perform the following functions. switch is used to turn off the system, the VDC system . Controls brake pressure to reduce wheel slip on SSD1153 still operates to prevent one drive wheel from slipping oneslipping drive wheel so power is transferred toby transferring power to a non slipping drive wheel.The vehicle should be driven with the Vehicle Dynamic a non slipping drive wheel on the same axle. The VDC warning light flashes if this occurs. AllControl (VDC) system ON for most driving conditions. . Controls brake pressure and engine output to other VDC functions are off and the VDC warning lightWhen the vehicle is stuck in mud or snow, the VDC reduce drive wheel slip based on vehicle speed will not flash. The VDC system is automaticallysystem reduces the engine output to reduce wheel (traction control function). reset to on when the ignition switch is placed in thespin. The engine speed will be reduced even if the . Controls brake pressure at individual wheels and“OFF” position then back to the “ON” position. accelerator is depressed to the floor. If maximum engine output to help the driver maintain control ofSee“Vehicle Dynamic Control (VDC) warning light (forengine power is needed to free a stuck vehicle, turn the vehicle in the following conditions: Australia and New Zealand)” (P.2-16) and “Vehicle the VDC system off. — understeer (vehicle tends to not follow the Dynamic Control (VDC) off indicator light” (P.2-18).To turn off the Vehicle Dynamic Control (VDC) system, steered path despite increased steering input)The computer has a built-in diagnostic feature thatpush the VDC OFF switch. Theindicator light will — oversteer (vehicle tends to spin due to certaintests the system each time you start the engine andilluminate. road or driving conditions). movethevehicle forward or in reverse at a slow speed.Push the VDC OFF switch again or restart the engine TheVDCsystemcanhelpthedrivertomaintaincontrol When the self-test occurs, you may hear a “clunk” to turn ON the system. of the vehicle, but it cannot prevent loss of vehiclenoise and/or feel a pulsation in the brake pedal. This is control in all driving situations. normal and is not an indication of a malfunction. When the VDC system operates, the VDC warning light in the instrument panel flashes so note the following: . The road may be slippery or the system may determine some action is required to help the vehicle on the steered path. 5-26 Starting and driving Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

owners manual Nissan Micra

owners manual Nissan Micra - year of production: 2010 - Nissan Micra March K13 owners manual EN