owners manual Subaru Forester

all ratings: 0 average rating: 5

Starting and operating7-11 &Entering the vehicle while ittransmitter within a few seconds immedi-start. is running via remote startately following remote engine start shut-! Todisengage the service mode down. Turntheignitionswitchto“ONthe” 1. Unlock the vehicle doors using the keyless entry system. If the vehicle’s&Pre-heating or pre-coolingposition, depress and hold the brake doors are unlocked manually using thethe interior of the vehiclepedal, then press and release the “ ” key, the vehicle’s alarm system will trigger button on the remote control transmitter and the remote engine start system willBefore exiting the vehicle, set the tem-three times. The system will pause for 1 turn off. Inserting the key into the ignitionperature controls to the desired settingsecond and flash the turn signal lights 1 switch and turning it to the “ON” position orand operation. After the system starts thetime indicating that the system has exited pressing the unlock button “” on thevehicle, the heater or air-conditioning willservice mode. remote keyless entry transmitter will dis-activate and heat or cool the interior to arm the alarm system. Refer to “Alarmyour setting. NOTE system” F2-14. Whentakingyourvehicleinforservice, 2. Enter the vehicle. Do not depress the&Service mode it is recommended that you inform the brake pedal. In service mode, the remote start functionservice personnel that your vehicle is 3. Insert the key into the ignition switchis temporarily disabled to prevent theequipped with a remote control start andturntothe“ON”position. If the ignitionsystem from unexpectedly starting thesystem. engine while being serviced. switch is accidentally turned to the “START” position, the system’s “starter! Toengage the service mode&Remotetransmitter program- anti-grind” feature will prevent the starter ming and programmable fea- from re-cranking. Turn the ignition switch to the“ON”ture option 4. Depress the brake pedal. The remoteposition, depress and hold the brake starter disengages, the vehicle’s powerpedal, then press and release the “ ”New transmitters can be programmed to window features are re-enabled and thebutton on the remote control transmitterthe engine starter system in the event that vehicle will operate normally.three times. The system will pause for 1remote transmitters are lost, stolen or second and then flash the turn signaldamaged.Theremoteenginestartsystem &Entering the vehicle follow- lights and honk the horn three timesalso has one programmable feature that indicating that the system is in servicecan be adjusted for user preference. ing remote engine start shut-mode. When attempting to activate theThe remote engine starter system can be down remote start system while in service programmed to either make an audible Analarmtriggermayoccurifthevehicleismode, the turn signal lights will flash andhorn chirp upon remote start activation or opened by the remote keyless entry the horn will honk two times and will notnot. Remote transmitter programming and – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders